Shotgun rebuild

[Ender]

I tried this color on the turbine housing and alt pulley, somewhat as an experiment. I will say that this paint isn't terribly durable, but we'll see how it holds up under driving conditions. I do really like the color though. Next time around I will try to spring for a candy apple metallic red powder coat.


I went to Magic Muffler to have my wastegate washer welded on so I could port it more. They only charged me $5 and it took about 15 minutes in total. Sweet. It gave me more time to perfect my port job.


Figured I'd get rid of that pesky pipe in my exhaust manifold.


Mock up to get stuff fitting right as I go along. I drastically shortened the vac line to the wastegate (compared with the ~3' that was being used before).


Is this flywheel ok to use? It came off a different '87 TII and the marks around the edge are from my grubby hands, and it's only surface rust. I can't currently get the flywheel nut off the old motor so it's actually quite fortunate I had this (I just hope it's good to use), as has been the case with a lot of things in this build.


I have a bunch of parts cleaning left to do, then I will start building. Anyone know a fast/easy way to get rid of old, hardened paper gaskets? Wire wheel maybe?

[RETed]

Originally Posted by Ender

I Is this flywheel ok to use? It came off a different '87 TII and the marks around the edge are from my grubby hands, and it's only surface rust. I can't currently get the flywheel nut off the old motor so it's actually quite fortunate I had this (I just hope it's good to use), as has been the case with a lot of things in this build.

If it's just surface rust, just knock it off with a wire wheel.
Make sure there's no "bluing" of the steel, and the surface should be even.
It's highly recommended to get it resurfaced from a machine shop.


-Ted

[Ender]

Originally Posted by RETed

If it's just surface rust, just knock it off with a wire wheel.
Make sure there's no "bluing" of the steel, and the surface should be even.
It's highly recommended to get it resurfaced from a machine shop.

Cool. I'll probably look into a resurfacing tonight, if it's less than $30 I'd definitely do it...