Whizbang's RX-2

Whizbang · 07-28-2013, 09:47 PM

Busy weekend working on the claptrap. Started boxing the frame i had to clearance for the FC subframe. I learned I hate welding upside down. Like, a lot.

Started stitching up the engine bay, which proved a pain. Lots of rust to contend with. Steering clearanced in the frame rail, but a little rust to remove forward of the cut. so i need to work on that still.

Then found one of my FB overskin templates, so i modified the Rx2 top to be an Rx7 for obvious reasons. Need to find the other one to the do the driver's side. I also might go ahead and smooth over the welds so it looks nicer. But OCD.

07-28-2013, 09:47 PM	#11
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Busy weekend working on the claptrap. Started boxing the frame i had to clearance for the FC subframe. I learned I hate welding upside down. Like, a lot. Started stitching up the engine bay, which proved a pain. Lots of rust to contend with. Steering clearanced in the frame rail, but a little rust to remove forward of the cut. so i need to work on that still. Then found one of my FB overskin templates, so i modified the Rx2 top to be an Rx7 for obvious reasons. Need to find the other one to the do the driver's side. I also might go ahead and smooth over the welds so it looks nicer. But OCD. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook