Whizbang's RX-2

Whizbang · 08-08-2013, 09:03 PM

Yea i will use an FB axle in the rear and that will match the front. And wicked flares Are a must!

Right now its mounted using stock fc mounts. Might have to consider seatig position with how its turning out. The oil filter would be in your shin stock wise

GySgtFrank · 08-08-2013, 09:12 PM

Quote:

Originally Posted by Whizbang

Yea i will use an FB axle in the rear and that will match the front. And wicked flares Are a must!

Right now its mounted using stock fc mounts. Might have to consider seatig position with how its turning out. The oil filter would be in your shin stock wise

The FB axle has quite a bit narrower track than the FC front. It could be compensated for with low or negative offset wheels though. The GSL-SE axles will also push the wheel out a little further than other FBs. Only way to tell for sure is to try it.

That does sound a little far back. How did you get it in there? Remove the firewall?

08-08-2013, 09:03 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Yea i will use an FB axle in the rear and that will match the front. And wicked flares Are a must! Right now its mounted using stock fc mounts. Might have to consider seatig position with how its turning out. The oil filter would be in your shin stock wise __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook