Help me choose apex seals and bearings

Sharingan 19 · 05-07-2012, 04:21 PM

Sounds like a good list with the except the reaming of the passages to 3/8", not to say it will be detrimental, just haven't heard that mentioned in any of the oil mod conversations.

I'm running the Goopy seals with 9.4 rotors personally, my plan is to run around 300whp daily (low boost) and 350whp (highboost) for ....fun stuff after the engine is broken in. No the only internal mods I've done is the modify the oil pressure regulator for 80psi.

05-07-2012, 04:21 PM	#2
Sharingan 19 Rotary Fanatic Join Date: May 2010 Posts: 138 Rep Power: 16	Sounds like a good list with the except the reaming of the passages to 3/8", not to say it will be detrimental, just haven't heard that mentioned in any of the oil mod conversations. I'm running the Goopy seals with 9.4 rotors personally, my plan is to run around 300whp daily (low boost) and 350whp (highboost) for ....fun stuff after the engine is broken in. No the only internal mods I've done is the modify the oil pressure regulator for 80psi.