Where can I buy 99/RZ front and rear rotors.

***Herblenny*** · 11-17-2008, 08:34 AM

Does anyone know where to get a 99/RZ larger front and rear rotors? I would like to get some drilled ones..

Does RacingBrakes make a replacement??

Brent · 11-17-2008, 11:04 AM

Phil, depending on your time frame you can:
1. Send your old Rotors to Coleman Racing(they will measure them to get the specs) and have them make whatever type of replacements you want... stock replacement, crossdrilled, vented, 2 piece free floating, etc...
2. Coleman Racing can send you a spec sheet and you can measure the rotors yourself, Fax/email it to Coleman and they will make them and send them to you.

I am sure someone makes some replacement rotors for them, but I don't know who. Coleman is the place where Damian, Andy(GooRoo) and alot of the other track guys had their rotors fabricated. I also went through them when I couldn't get any straight answers on the rotors for my Porsche big red's front brakes.

I know you aren't looking for stock rotors, but just in case someone is searching and this thread pops up... You can get 99spec RZ/RS stock rotors from Mazda Motorsports and prob. Corksport. I know the rears are $120 a piece from Mazda Motorsports.

***Herblenny*** · 11-17-2008, 11:18 AM

Brent, Thanks for that info. I'll try to get in touch with them and ask. I looked at RHD and just the rotors were like 800-900. Possibly because of the shipping?

What I would like to get is kind of like the racingbrake rotors...

Brent · 11-17-2008, 11:45 AM

The 2 piece full floating... Coleman can build them.

JL1RX7 · 11-17-2008, 02:15 PM

Also you could try cquence for them. I know they make them for most models. I have a set of cross dimmpled and slotted for my sencond gen and am very pleased with them.

Brent · 11-18-2008, 02:35 PM

Phil, I've been looking a lot at Racing Brakes stuff the last couple of days. I almost bet if we contacted them and had some rotors to send in, they could make some replacement rotors for us without too much trouble as long as there is enough interest in it.

***Herblenny*** · 11-18-2008, 02:59 PM

yeah.. I don't think it would be too much for them to make it..

I think their rear brakes are very similar to 99.. I'll measure it and post here.. I have those RB big brake kit..

Brent · 11-18-2008, 03:44 PM

sweet. I just posted a message on their forum in the RX7 thread.

albertomg · 11-26-2008, 08:03 PM

I have a slightly used set of front rotors gathering dust in the garage if anyone wants them...

Trout2 · 11-27-2008, 12:48 AM

Precision is who did them in past group buys.

Jack

IR Performance · 11-28-2008, 10:00 AM

You try FD Newbie?

Chadwick · 11-29-2008, 02:17 AM

Quote:

Originally Posted by IR Performance

You try FD Newbie?

I don't think he wants to wait 6 months to get them

***Herblenny*** · 12-01-2008, 10:14 AM

I got an email from Garfinkle and I think I'm going to get him to just drill my current rotors or buy some new ones and get it drilled.

11-17-2008, 08:34 AM	#1
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Where can I buy 99/RZ front and rear rotors. Does anyone know where to get a 99/RZ larger front and rear rotors? I would like to get some drilled ones.. Does RacingBrakes make a replacement?? __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-17-2008, 11:04 AM	#2
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	Phil, depending on your time frame you can: 1. Send your old Rotors to Coleman Racing(they will measure them to get the specs) and have them make whatever type of replacements you want... stock replacement, crossdrilled, vented, 2 piece free floating, etc... 2. Coleman Racing can send you a spec sheet and you can measure the rotors yourself, Fax/email it to Coleman and they will make them and send them to you. I am sure someone makes some replacement rotors for them, but I don't know who. Coleman is the place where Damian, Andy(GooRoo) and alot of the other track guys had their rotors fabricated. I also went through them when I couldn't get any straight answers on the rotors for my Porsche big red's front brakes. I know you aren't looking for stock rotors, but just in case someone is searching and this thread pops up... You can get 99spec RZ/RS stock rotors from Mazda Motorsports and prob. Corksport. I know the rears are $120 a piece from Mazda Motorsports. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

11-17-2008, 11:18 AM	#3
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Brent, Thanks for that info. I'll try to get in touch with them and ask. I looked at RHD and just the rotors were like 800-900. Possibly because of the shipping? What I would like to get is kind of like the racingbrake rotors... __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-17-2008, 11:45 AM	#4
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	The 2 piece full floating... Coleman can build them. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM Last edited by Brent; 11-17-2008 at 05:30 PM..

11-18-2008, 02:35 PM	#6
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	Phil, I've been looking a lot at Racing Brakes stuff the last couple of days. I almost bet if we contacted them and had some rotors to send in, they could make some replacement rotors for us without too much trouble as long as there is enough interest in it. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

11-17-2008, 02:15 PM	#5
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA iTrader: (1) Posts: 487 Rep Power: 17	Also you could try cquence for them. I know they make them for most models. I have a set of cross dimmpled and slotted for my sencond gen and am very pleased with them.

11-18-2008, 02:59 PM	#7
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	yeah.. I don't think it would be too much for them to make it.. I think their rear brakes are very similar to 99.. I'll measure it and post here.. I have those RB big brake kit.. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-18-2008, 03:44 PM	#8
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	sweet. I just posted a message on their forum in the RX7 thread. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

11-26-2008, 08:03 PM	#9
albertomg Rotary Fan in Training Join Date: Feb 2008 Location: Bay Area CA iTrader: (0) Posts: 91 Rep Power: 17	I have a slightly used set of front rotors gathering dust in the garage if anyone wants them...

11-27-2008, 12:48 AM	#10
Trout2 Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 104 Rep Power: 17	Precision is who did them in past group buys. Jack

11-28-2008, 10:00 AM	#11
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	You try FD Newbie? __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

12-01-2008, 10:14 AM	#13
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I got an email from Garfinkle and I think I'm going to get him to just drill my current rotors or buy some new ones and get it drilled. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny