Where can I buy 99/RZ front and rear rotors.
 

Does anyone know where to get a 99/RZ larger front and rear rotors? I would like to get some drilled ones..

Does RacingBrakes make a replacement??

Phil, depending on your time frame you can:
1. Send your old Rotors to Coleman Racing(they will measure them to get the specs) and have them make whatever type of replacements you want... stock replacement, crossdrilled, vented, 2 piece free floating, etc...
2. Coleman Racing can send you a spec sheet and you can measure the rotors yourself, Fax/email it to Coleman and they will make them and send them to you.

I am sure someone makes some replacement rotors for them, but I don't know who. Coleman is the place where Damian, Andy(GooRoo) and alot of the other track guys had their rotors fabricated. I also went through them when I couldn't get any straight answers on the rotors for my Porsche big red's front brakes.

I know you aren't looking for stock rotors, but just in case someone is searching and this thread pops up... You can get 99spec RZ/RS stock rotors from Mazda Motorsports and prob. Corksport. I know the rears are $120 a piece from Mazda Motorsports.

Brent, Thanks for that info. I'll try to get in touch with them and ask. I looked at RHD and just the rotors were like 800-900. Possibly because of the shipping?

What I would like to get is kind of like the racingbrake rotors...

The 2 piece full floating... Coleman can build them.

Also you could try cquence for them. I know they make them for most models. I have a set of cross dimmpled and slotted for my sencond gen and am very pleased with them.

Phil, I've been looking a lot at Racing Brakes stuff the last couple of days. I almost bet if we contacted them and had some rotors to send in, they could make some replacement rotors for us without too much trouble as long as there is enough interest in it.

yeah.. I don't think it would be too much for them to make it..

I think their rear brakes are very similar to 99.. I'll measure it and post here.. I have those RB big brake kit..

sweet. I just posted a message on their forum in the RX7 thread.

I have a slightly used set of front rotors gathering dust in the garage if anyone wants them...

Precision is who did them in past group buys.

Jack

You try FD Newbie?

I don't think he wants to wait 6 months to get them :)

I got an email from Garfinkle and I think I'm going to get him to just drill my current rotors or buy some new ones and get it drilled.