Do the Secondary Injectors Operate on Startup?

Mobius · 06-12-2008, 09:20 PM

As stated above, do the secondary injectors operate while cranking the car? I haven't been able to find a concise yes or no anywhere.

Thank you.

tom93r1 · 06-13-2008, 02:41 AM

You could disconnect them a drive around never know they were disabled until you started getting into boost

0110-M-P · 06-13-2008, 07:23 AM

Quote:

Originally Posted by tom93r1

You could disconnect them a drive around never know they were disabled until you started getting into boost

This sounds like a disaster waiting to happen. I definitely would not try this.

Mobius · 06-13-2008, 08:11 AM

So that would be an absolutely not?

SPICcnmFD · 06-13-2008, 09:05 AM

Correct

tom93r1 · 06-13-2008, 02:58 PM

Quote:

Originally Posted by 0110-M-P

This sounds like a disaster waiting to happen. I definitely would not try this.

Yeah, I wouldnt recommend trying it. Just if you did happen to try it, keep the throttle low so the secondaries dont come on.

Mobius · 06-13-2008, 05:22 PM

They aren't used for cold start or anything like that?

David Jerome · 06-13-2008, 05:30 PM

Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle.

Mobius · 06-13-2008, 07:24 PM

Quote:

Originally Posted by David Jerome

Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle.

Thank you. They are brand new injectors, and they have been leak tested. (albeit 1680cc which is why I figured that if they were used, I may have to change the startup fuel settings). I'm just trying to eliminate them as possible suspects to my starting/running issues.

David Jerome · 06-15-2008, 10:06 AM

Quote:

Originally Posted by Mobius

Thank you. They are brand new injectors, and they have been leak tested. (albeit 1680cc which is why I figured that if they were used, I may have to change the startup fuel settings). I'm just trying to eliminate them as possible suspects to my starting/running issues.

You can always pinch an oring during install, I have installed hundreds of injectors and I recently did this on one of my cars. I also had a freshly cleaned and flow tested injector leak out the top immediately after install recently. You will get it sorted out.

06-12-2008, 09:20 PM	#1
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	Do the Secondary Injectors Operate on Startup? As stated above, do the secondary injectors operate while cranking the car? I haven't been able to find a concise yes or no anywhere. Thank you. __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 08:11 AM	#4
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	So that would be an absolutely not? __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 09:05 AM	#5
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Correct __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

06-13-2008, 05:22 PM	#7
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	They aren't used for cold start or anything like that? __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 05:30 PM	#8
David Jerome RCC Contributor Join Date: Jan 2008 iTrader: (10) Posts: 713 Rep Power: 17	Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle. __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work

06-13-2008, 02:41 AM	#2
tom93r1 Rotary Fan in Training Join Date: Feb 2008 iTrader: (0) Posts: 45 Rep Power: 0	You could disconnect them a drive around never know they were disabled until you started getting into boost