My mechanical preturbo water injection

dudemaaan · 08-31-2009, 06:16 PM

Here is a video of the system being tested with an air compressor, you can see how fine the mist of water is. Click to play in photobucket. It's crappy quality but a cool lil video.

Here are some pics of when it was first installed. As you can see there is "T" on the top if the tank. The air came from the turbo, to the T, into one side of the nozzle and to the tank to pressurize it. I later removed the T because I found a 5 psi pressure drop in the tank with the T in place. The red hose goes to the pressure switch out of view.

08-31-2009, 06:16 PM	#6
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	Here is a video of the system being tested with an air compressor, you can see how fine the mist of water is. Click to play in photobucket. It's crappy quality but a cool lil video. Here are some pics of when it was first installed. As you can see there is "T" on the top if the tank. The air came from the turbo, to the T, into one side of the nozzle and to the tank to pressurize it. I later removed the T because I found a 5 psi pressure drop in the tank with the T in place. The red hose goes to the pressure switch out of view. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!