To-Do List DGRR 2015

N.RotaryTech · 04-04-2015, 03:58 PM

Its so refreshing to not have an exhaust leak!
FIXED!!!!

So i ditched the RB mufflers and put on an N1 muffler that i bought from Reese.
I Tig welded the pipe from the N1 to the RB presilencer, Because the stud that I cut short from along time ago was not providing the tightness to properly seal, and of course the studs won't come out. So the whole system only has 2 gaskets, hehe.
I also made a homemade silencer for the exhaust tip. 4&3/8" down to 2&1/4".
The exhaust has a nice deep sound to it.
Love it.

04-04-2015, 03:58 PM	#1
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC Posts: 552 Rep Power: 18	Its so refreshing to not have an exhaust leak! FIXED!!!! So i ditched the RB mufflers and put on an N1 muffler that i bought from Reese. I Tig welded the pipe from the N1 to the RB presilencer, Because the stud that I cut short from along time ago was not providing the tightness to properly seal, and of course the studs won't come out. So the whole system only has 2 gaskets, hehe. I also made a homemade silencer for the exhaust tip. 4&3/8" down to 2&1/4". The exhaust has a nice deep sound to it. Love it. __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.