Rice Racing M&W CDI COP Set-up - Page 11

RICE RACING · 01-14-2015, 04:37 AM

mung it

almoststockfc · 01-14-2015, 07:16 AM

Could you explain what comes in your kit? Bracket, hardware, etc. etc.

RICE RACING · 01-14-2015, 07:27 AM

Quote:

Originally Posted by almoststockfc

Could you explain what comes in your kit? Bracket, hardware, etc. etc.

4 x COP adaptors
(each one of these has a cover plate, internal contact buttons, and a spring, O-ring seals)
2 x Coil spacer/mounts
(FRONT and a REAR mount)
1 x Engine bracket/mount
(mounts off center plate)
Fasteners for the mounts x 3 and for the COP cover plates x 16
(all fasteners required to complete assembly)
Instruction sheet, with CAD pictures of fitment, and instructions
(Detail on assembly and trim needed to trailing coil tab and how to do that with step by step pictorial illustrations.)

infernosg · 01-14-2015, 08:32 AM

Email sent. I'm in for a set of just the COP adapters.

Fendamonky · 01-14-2015, 09:13 AM

Quote:

Originally Posted by RICE RACING

Preliminary Pricing is as pending me getting 10 buyers here, can supply within a month time frame:

RRCOP13BREW-IGN1A-VM Vertical mounting
$995US

RRCOP-IGN1A-A adaptors for separate supply
$126US *each* so for 13B = $504

So anyone who is here who wants this the process now is to send me an E-Mail! (only) please, link below to my web site, this way I can track it and process it, cant go through whole thread as you can understand and see I am VERY BUSY, designing, testing, building this and many other things

so thanks for your understanding.

Hope to hear from you on email.

Peter,

Are those prices including shipping?

For those who are having difficulty navigating Peters site, his email is: peter@riceracing.com.au

RICE RACING · 01-14-2015, 09:28 AM

Quote:

Originally Posted by Fendamonky

Peter,

Are those prices including shipping?

For those who are having difficulty navigating Peters site, his email is: peter@riceracing.com.au

out of the goodness of my heart

yes shipped, to sweeten deal

Fendamonky · 01-14-2015, 09:52 AM

Quote:

Originally Posted by RICE RACING

out of the goodness of my heart

yes shipped, to sweeten deal

speedjunkie · 01-14-2015, 01:53 PM

I'm assuming the prices for the other versions will be around $995 also, is that correct? I'm still waiting to hear back from my buddy. He did the measurements but lost the paper he wrote them on lol.

RICE RACING · 01-14-2015, 03:40 PM

Quote:

Originally Posted by speedjunkie

I'm assuming the prices for the other versions will be around $995 also, is that correct? I'm still waiting to hear back from my buddy. He did the measurements but lost the paper he wrote them on lol.

The M&W version should be a little less as there will be no complex COP Adaptor innvolved (but this will be offset buy expense of buying CDI boxes obviously.

The 'ghetto' version I will not make since price of the CNC machined one is pretty good. Horizontal will not have enough demand so its on the back burner as well, as its a small market, that the vertical will cover anyway.

RICE RACING · 01-14-2015, 04:24 PM

Showing stress/deflection analysis which helped me determine design of last lot of parts (M&W version) this load is 'like' hanging an engine rotor off this part!

(5 times more load than it will see in reality)

RICE RACING · 01-14-2015, 07:06 PM

Quote:

Originally Posted by hybrid G

I am interested in acquiring a kit.

What's the eta on production ?

Less than a month from now........... pending demand from here.

RICE RACING · 01-14-2015, 07:13 PM

Quote:

Originally Posted by neit_jnf

I'm down for a vertical ghetto set

See first page, 'ghetto' will be eliminated since the cost benefit does not warrant the ghettoness of the end product.

Just CNC version in vertical is being made.

FC Zach · 01-15-2015, 12:04 AM

Email sent.

RICE RACING · 01-15-2015, 07:36 AM

Just to give people some idea of the completeness of the designs, here is me addressing one 'interference issue' on the M&W set up, multiple sections everywhere to check all kinds of things....... good luck to anyone who wants to copy it LOL.

Shit is what I would class 99.9% perfect now across all offerings.

This little bloke *Habib* helps with the long hours of sanity testing tedious validations !

NOTE: all coils are fully supported on the 'shoulder' thus one bolt mounting method suffices... is rock solid across both systems (IGN-1A and M&W) they cant rotate anywhere and are super secure too

(the odd shaped 'red bits' around the bolt holes are the threads cut in a plane, not out of round holes haha)

RICE RACING · 01-15-2015, 05:08 PM

Finalized the horizontal IGN-1A version (for those with race car set up) or who want to move stuff around to get this to fit.

01-14-2015, 04:37 AM	#151
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	mung it __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 01-23-2015 at 08:43 AM.

01-14-2015, 07:16 AM	#152
almoststockfc ..... Join Date: Jan 2010 Location: Murfreesboro, TN Posts: 543 Rep Power: 16	Could you explain what comes in your kit? Bracket, hardware, etc. etc. __________________ -75 RE_W_PU - -76 Hercules W2000 - DGRR 2012 3rd place Old School -75 Hercules W2000 MSO - DGRR 2011 Peoples Choice - April 2011 Rotary of the Month -Rotary snowmobile powered go kart - DGRR 2012 Peoples Choice - RIP

01-14-2015, 08:32 AM	#154
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Email sent. I'm in for a set of just the COP adapters. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

01-14-2015, 04:24 PM	#160
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Showing stress/deflection analysis which helped me determine design of last lot of parts (M&W version) this load is 'like' hanging an engine rotor off this part! (5 times more load than it will see in reality) __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

01-15-2015, 12:04 AM	#163
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Email sent. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

01-14-2015, 01:53 PM	#158
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I'm assuming the prices for the other versions will be around $995 also, is that correct? I'm still waiting to hear back from my buddy. He did the measurements but lost the paper he wrote them on lol.

01-15-2015, 07:36 AM	#164
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Just to give people some idea of the completeness of the designs, here is me addressing one 'interference issue' on the M&W set up, multiple sections everywhere to check all kinds of things....... good luck to anyone who wants to copy it LOL. Shit is what I would class 99.9% perfect now across all offerings. This little bloke Habib helps with the long hours of sanity testing tedious validations ! NOTE: all coils are fully supported on the 'shoulder' thus one bolt mounting method suffices... is rock solid across both systems (IGN-1A and M&W) they cant rotate anywhere and are super secure too (the odd shaped 'red bits' around the bolt holes are the threads cut in a plane, not out of round holes haha) __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 01-15-2015 at 08:41 AM. Reason: head engineer photo!

01-15-2015, 05:08 PM	#165
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Finalized the horizontal IGN-1A version (for those with race car set up) or who want to move stuff around to get this to fit. __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 01-15-2015 at 06:48 PM.