1988 13b into a 1984 GSL-SE

fc nut · 01-01-2013, 08:00 PM

i was helped with this swap in my se. i have an 87 n/a in my 84. here's a list of what you'll need to make this swap work.you do not need to do anything to the ecu or harness in any way.let me know if you have any questions.

you'll need to reuse these parts from the se engine:
air flow meter,injectors,tps,distributor,oil pan,oil pickup tube,front engine cover,oil cooler and lines,radiator and heater core hoses,engine mounts and bracket

what you need from the s4 engine:
tps bracket,alt bracket,intake manifold,throttle body,intake tubing going to the throttle body from air flow meter,flywheel,water pump housing and water pump and pulleys,omp and lines,secondary port actuators

what you don't need from the s4 engine:
tps,injectors,cas,oil pan,oil pickup tube

fc nut · 01-01-2013, 08:53 PM

i updated my swap thread. "new old car". check it out. to use the s4 trans,you have to swap the se's tailshaft housing to the s4 trans.

01-01-2013, 08:00 PM	#1
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio Posts: 282 Rep Power: 18	i was helped with this swap in my se. i have an 87 n/a in my 84. here's a list of what you'll need to make this swap work.you do not need to do anything to the ecu or harness in any way.let me know if you have any questions. you'll need to reuse these parts from the se engine: air flow meter,injectors,tps,distributor,oil pan,oil pickup tube,front engine cover,oil cooler and lines,radiator and heater core hoses,engine mounts and bracket what you need from the s4 engine: tps bracket,alt bracket,intake manifold,throttle body,intake tubing going to the throttle body from air flow meter,flywheel,water pump housing and water pump and pulleys,omp and lines,secondary port actuators what you don't need from the s4 engine: tps,injectors,cas,oil pan,oil pickup tube __________________ leaving my carbon footprint....one start up at a time

01-01-2013, 08:53 PM	#2
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio Posts: 282 Rep Power: 18	i updated my swap thread. "new old car". check it out. to use the s4 trans,you have to swap the se's tailshaft housing to the s4 trans. __________________ leaving my carbon footprint....one start up at a time Last edited by fc nut; 01-01-2013 at 08:56 PM.