It looked so simple at first!

GySgtFrank · 03-27-2012, 01:56 PM

Thank you. I followed along TTTs post and it was pretty straightforward. The biggest problem I had was with the caps being corroded on TIGHT, and getting the stake to come loose on the pinion plug. I think Godzilla went to Hiroshima and was working on RX7s the day they staked that plug in. I used my MIG to weld the quill up like TTT did. I did cut off the inlets and weld up the holes in the body, but I used bolts/pinch nuts and flat nylon washers to seal the holes in the aluminum housing.

03-27-2012, 01:56 PM	#1
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,008 Rep Power: 16	Thank you. I followed along TTTs post and it was pretty straightforward. The biggest problem I had was with the caps being corroded on TIGHT, and getting the stake to come loose on the pinion plug. I think Godzilla went to Hiroshima and was working on RX7s the day they staked that plug in. I used my MIG to weld the quill up like TTT did. I did cut off the inlets and weld up the holes in the body, but I used bolts/pinch nuts and flat nylon washers to seal the holes in the aluminum housing. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585 Last edited by GySgtFrank; 03-27-2012 at 09:46 PM.