Falcore - Page 6

speedjunkie · 04-25-2011, 02:36 PM

Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to?

I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

Force13b · 04-25-2011, 03:43 PM

Quote:

Originally Posted by speedjunkie

Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to?

I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

There seems to be an exhaust gasket in there but also a butt load of gasket sealer oozing out of it. I'm planning on pulling it tonight i'll take lots of pics.

I cleaned the pipe off and did the "Is that JB weld *poke*" and the nipple fell off. I found another 1 for 20$

speedjunkie · 04-25-2011, 08:32 PM

Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha.

Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha.

And I think the technical term for that "poke" is "poke of disbelief" LOL.

Force13b · 04-26-2011, 02:35 PM

Quote:

Originally Posted by speedjunkie

Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha.

I have no idea. When his car gets up to temp it smells like burnt popcorn coming out of the tail pipe.

Quote:

Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha.

That's a bit different but a good idea, would have been cheaper then 20$ for a new pipe.

Quote:

And I think the technical term for that "poke" is "poke of disbelief" LOL.

Noted in my technical term dictionary.

speedjunkie · 04-26-2011, 03:46 PM

Quote:

Originally Posted by Force13b

I have no idea. When his car gets up to temp it smells like burnt popcorn coming out of the tail pipe.

Now see, I would just get hungry all the time smelling that haha.

Quote:

That's a bit different but a good idea, would have been cheaper then 20$ for a new pipe.

Yeah it was nice not having to buy and wait for one to ship too.

Force13b · 04-29-2011, 12:13 PM

More funny shit from my friends Jason's car so this lug nut was holding the DP to the cat

yes lug nut

Gasket maker on the DP to cat

I was hopping to find were the "burnt popcorn" smell was coming from but couldn't really find anything definitive

We pulled his stereo since we are installing a Defi Din gauges

Anyways look what we found, you know he wondered why his antenna didn't work rofl

Yes that's a standard wood screw, screwed into the antenna port. This is the wire that should be for the antenna

Now see the screw and the black wire behind that you see a metal taping screw, yeah it grounds out right there

And another rats nest of wires

tweiss3 · 04-29-2011, 01:51 PM

hey, that kinda looks like what my stocker looked like when i pulled it. Grabbed the power wires and antenna wires, and reran everything new.

speedjunkie · 05-01-2011, 01:56 AM

Wow...I don't even know what to say man. He should shoot whoever he bought the car from. Just wow.

Force13b · 05-02-2011, 12:14 PM

I was thinking this would be a short project but bit by bit it's getting longer and longer. We'll see what we find around the next corner.

Force13b · 05-04-2011, 11:56 AM

Can has door light.

jerd_hambone · 05-04-2011, 09:37 PM

Hey force, where do you live?

speedjunkie · 05-05-2011, 01:59 AM

Quote:

Originally Posted by Force13b

Can has door light.

That's what those are for?! My wires on the driver's door are ripped out of the hole and I believe that's what is drawing on my battery, because I disconnected the wires behind the door panel and the power stopped draining off. I never knew what that was for though, no shit huh lol. I don't feel in such a hurry to fix it now haha.

Force13b · 05-06-2011, 01:36 PM

Quote:

Originally Posted by jerd_hambone

Hey force, where do you live?

CA

Quote:

Originally Posted by speedjunkie

That's what those are for?! My wires on the driver's door are ripped out of the hole and I believe that's what is drawing on my battery, because I disconnected the wires behind the door panel and the power stopped draining off. I never knew what that was for though, no shit huh lol. I don't feel in such a hurry to fix it now haha.

lol yep. I didn't find out about it tell 2yrs ago when i was searching for how to replace my door handle and randomly stumbled across it. It's a cool novelty that's about it. I had the door apart so might as well fix it.

jerd_hambone · 05-06-2011, 07:25 PM

I saw a car identical to yours on a trip to Florida in Feb. Thought it may have been you haha

Duffman692002 · 05-06-2011, 10:36 PM

Quote:

Originally Posted by Force13b

CA

lol yep. I didn't find out about it tell 2yrs ago when i was searching for how to replace my door handle and randomly stumbled across it. It's a cool novelty that's about it. I had the door apart so might as well fix it.

Guess who has two thumbs, a 26 year old car, and a keyhole light that has worked for all 26 years?

THIS GUY!

04-29-2011, 01:51 PM	#82
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio Posts: 319 Rep Power: 15	hey, that kinda looks like what my stocker looked like when i pulled it. Grabbed the power wires and antenna wires, and reran everything new. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

04-25-2011, 02:36 PM	#76
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Wait, they used the gasket sealer instead of an exhaust gasket, or in addition to? I fixed my inlet pipe nipple several years ago with JB Weld but mine held haha, never had any problems with it. It was the same nipple on the same pipe too haha.

04-25-2011, 08:32 PM	#78
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Why would anyone even use gasket sealant on the exhaust anyway? LOL I mean, I guess if it's leaking...but then that would be time for a new gasket I believe? I'm just spitballing here haha. Actually now that I think about it, we used a brass nipple and threaded it down into the plastic and then JB Welded to make sure it sealed, so I can't give JB all the credit haha. And I think the technical term for that "poke" is "poke of disbelief" LOL.

04-29-2011, 12:13 PM	#81
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	More funny shit from my friends Jason's car so this lug nut was holding the DP to the cat yes lug nut Gasket maker on the DP to cat I was hopping to find were the "burnt popcorn" smell was coming from but couldn't really find anything definitive We pulled his stereo since we are installing a Defi Din gauges Anyways look what we found, you know he wondered why his antenna didn't work rofl Yes that's a standard wood screw, screwed into the antenna port. This is the wire that should be for the antenna Now see the screw and the black wire behind that you see a metal taping screw, yeah it grounds out right there And another rats nest of wires

05-01-2011, 01:56 AM	#83
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Wow...I don't even know what to say man. He should shoot whoever he bought the car from. Just wow.

05-02-2011, 12:14 PM	#84
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	I was thinking this would be a short project but bit by bit it's getting longer and longer. We'll see what we find around the next corner.

05-04-2011, 11:56 AM	#85
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	Can has door light.