Electrical connectors - t-stat housing - Page 2

hades · 11-07-2010, 06:05 PM

put in an order thru http://rjminjectiontech.com/?p=12

Garfinkles Motor Works · 11-07-2010, 11:51 PM

Good prices and the tools Thanks for the info .I buy the plastic part 5 to the box ,one box is male and another box for female .The metal parts male 25 per box female 25 per box and the rubber seal 25 per box .

Prodigy · 11-08-2010, 01:19 AM

Quote:

Originally Posted by TitaniumTT

The deutch connectors on the other hand, or any mil-spec plug... I spent $320 on those crimps but OH MY GOD ARE THEY SOOOO SEXY....

Pics?

I love seeing good wiring jobs.... warms a special place in my heart :P

J.

***TitaniumTT*** · 11-08-2010, 07:05 AM

Quote:

Originally Posted by hades

put in an order thru http://rjminjectiontech.com/?p=12

Good prices for single kits, and definately a good price on the tool.

I go through WayTekWire.com.... here's the big difference
The link you provided is $1.75 for the kit... waytek sells the Female housing for (and these are all rounded to the nearest full cent) $.30, Male housing for $.51, seal for $.07, and the terminals for $.12. So in theory a kit would cost $1.19. The kicker is the minumum on orders is 10. So while it's cheaper for me to go through Waytek, when are you going to use 9 more of those connectors? Good find hades.

Quote:

Originally Posted by Garfinkles Motor Works

Good prices and the tools Thanks for the info .I buy the plastic part 5 to the box ,one box is male and another box for female .The metal parts male 25 per box female 25 per box and the rubber seal 25 per box .

Through Napa?

I have that tool, but found that after wiring for an entire day that the racheting crimper for 2.5x the price, is definately worth it, again, for me, becuase I do ALOT of wiring

Quote:

Originally Posted by Prodigy

Pics?

I love seeing good wiring jobs.... warms a special place in my heart :P

J.

I've got them in my build threads.... allllll over the place.

hades · 11-08-2010, 07:26 AM

I checked every parts store in Denton - Orielly's, Pep Boys, Napa, Auto Zone, Car Quest and THE DEALERSHIP. It was like I was talking to retarded monkey's.

can't wait for it to show up. and my back cover to my replica M2 box.

vex · 11-08-2010, 08:21 AM

I think I'll be picking up a crimping tool (Daniels af8) and hopefully sourcing a cannon plug with the appropriate gage and number of ports for my ECU install. We'll see what happens.

***TitaniumTT*** · 11-08-2010, 04:14 PM

http://www.connecticc.com/

vex · 11-08-2010, 04:24 PM

hey TTT, what is the gage size on your cannon plugs? Are they 20 or 16?

***TitaniumTT*** · 11-08-2010, 04:38 PM

20. Tefzel will carry 7A and the pins are rated for that. I'm using some hermetically sealed connectors on my fuel cell that are 16ga Tefzel (13A) and they're doubled up for the fuel pumps with Viton heatshrink. There is really no reason to have any wire in an engine harness over 16-18 ga, I don't care what anyone says.

RXtacy · 11-10-2010, 10:25 AM

Quote:

Originally Posted by TitaniumTT

http://www.connecticc.com/

I use amphenol at work.
http://www.amphenol-aerospace.com/default.asp

Also does anyone know where I can get the dies for the weatherpack connectors? I have the tool just need these dies.

hades · 11-15-2010, 09:39 AM

Got my connectors and tools in. FYI. The company I bougt from is small. Their communication is so so. But I did get it on time and everything us in the box.

I played around / practiced and got the fan switched wired up. Then I got a call to drink beer. Decided that wiring drunk would be a bad idea

***TitaniumTT*** · 11-15-2010, 09:41 AM

It is..... Wiring while tired is a bad idea also....

***TitaniumTT*** · 11-15-2010, 09:42 AM

Quote:

Originally Posted by RXtacy

I use amphenol at work.
http://www.amphenol-aerospace.com/default.asp

Also does anyone know where I can get the dies for the weatherpack connectors? I have the tool just need these dies.

Whoever offers the tool should also offer the dies. The dies are probably going to be specific to the tool.

FWIW, I'm not a fan of the die set tools. I'd rather just get a complete crimper.

hades · 11-15-2010, 07:53 PM

the only thing I don't like about these connectors is that they are kinda long. Wish they were a bit more compact. That's just me being picky.

Prodigy · 11-15-2010, 08:56 PM

Quote:

Originally Posted by TitaniumTT

I've got them in my build threads.... allllll over the place.

There better be pictures of the crimper too... (thats what I was after, I mean a $320 crimper.... I hope it at least gives you a little tickle goodnight before you put it away...)

I'll be searching your build threads now :P

J.

11-07-2010, 06:05 PM	#16
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	put in an order thru http://rjminjectiontech.com/?p=12 __________________ This is going to tear

11-08-2010, 07:26 AM	#20
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	I checked every parts store in Denton - Orielly's, Pep Boys, Napa, Auto Zone, Car Quest and THE DEALERSHIP. It was like I was talking to retarded monkey's. can't wait for it to show up. and my back cover to my replica M2 box. __________________ This is going to tear

11-08-2010, 08:21 AM	#21
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	I think I'll be picking up a crimping tool (Daniels af8) and hopefully sourcing a cannon plug with the appropriate gage and number of ports for my ECU install. We'll see what happens. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

11-08-2010, 04:14 PM	#22
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	http://www.connecticc.com/ __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-08-2010, 04:24 PM	#23
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	hey TTT, what is the gage size on your cannon plugs? Are they 20 or 16? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

11-07-2010, 11:51 PM	#17
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Good prices and the tools Thanks for the info .I buy the plastic part 5 to the box ,one box is male and another box for female .The metal parts male 25 per box female 25 per box and the rubber seal 25 per box .

11-08-2010, 04:38 PM	#24
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	20. Tefzel will carry 7A and the pins are rated for that. I'm using some hermetically sealed connectors on my fuel cell that are 16ga Tefzel (13A) and they're doubled up for the fuel pumps with Viton heatshrink. There is really no reason to have any wire in an engine harness over 16-18 ga, I don't care what anyone says. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-15-2010, 09:39 AM	#26
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	Got my connectors and tools in. FYI. The company I bougt from is small. Their communication is so so. But I did get it on time and everything us in the box. I played around / practiced and got the fan switched wired up. Then I got a call to drink beer. Decided that wiring drunk would be a bad idea __________________ This is going to tear

11-15-2010, 09:41 AM	#27
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	It is..... Wiring while tired is a bad idea also.... __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-15-2010, 07:53 PM	#29
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	the only thing I don't like about these connectors is that they are kinda long. Wish they were a bit more compact. That's just me being picky. __________________ This is going to tear