Electrical connectors - t-stat housing

Garfinkles Motor Works · 10-25-2010, 01:22 AM

I use GM weather packs .Just solder wire ,wires to the unit and install a GM connector .Cut the broken connector from the harness and put in the maching GM connector .I keep 1 wire 2 wire 3 wire and 4 wire ones in stock .They make a 6 wire one as well .I buy them by the box and have been useing them for several years.I solder on the wire wires to the sensor and fill the cavity with epoxie .

hades · 10-25-2010, 07:18 PM

Thanks,

Rotary Performance gave the same advice. Where do you get your connectors?

also can a mod fix my typo in the title?

10-25-2010, 01:22 AM	#1
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I use GM weather packs .Just solder wire ,wires to the unit and install a GM connector .Cut the broken connector from the harness and put in the maching GM connector .I keep 1 wire 2 wire 3 wire and 4 wire ones in stock .They make a 6 wire one as well .I buy them by the box and have been useing them for several years.I solder on the wire wires to the sensor and fill the cavity with epoxie . Last edited by Garfinkles Motor Works; 10-25-2010 at 01:25 AM. Reason: Add a line

10-25-2010, 07:18 PM	#2
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	Thanks, Rotary Performance gave the same advice. Where do you get your connectors? also can a mod fix my typo in the title? __________________ This is going to tear