|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
RCC Contributor
Join Date: Mar 2008
Posts: 535
Rep Power: 18 ![]() |
I made my tray to receive both battery post locations keeping the positive post at the top .It fits contured along the finder with an angle part to keep the battery from sliding into the motor .There two sets of threaded parts so I can move the hold down bracket as needed for the battery .It is bolted in with two stock threaded holes in the frame,body .The part that bolts in to hold the battery tray innercooler air box is replaced with a three piece brace that is adjustible so I can line up the duct work to the innercooler .The battery tray also sits on this brace .
|
![]() |
![]() |
![]() |
#2 |
Rotary Fanatic
Join Date: Mar 2008
Location: Freedom Land
Posts: 316
Rep Power: 18 ![]() |
1. your engine bay looks really damn good.
2. more pictures of battery box/holder/non-flying device 3. how much for non-fancy version of said device? There was a thread on the other page about people wanting a 51R holder. Goodfellas locked temporarily, which made it lose steam. Don't know if you want to made a few and try to sell them.
__________________
This is going to tear |
![]() |
![]() |
![]() |
Bookmarks |
|
|