Wiper switches

[Nismo]

Originally Posted by My5ABaby

The solder joints in the clock just go bad with time. I managed to fix mine by resoldering every point in the cluster.

You just resolder the 10pins or whatever for the connector, and it will fix it!

Originally Posted by NYsNumba1Man

How hard is it to resoder the wiper switch?

Not hard at all, fixed mine in just over anhour with removal/install time.

[vex]

Originally Posted by Nismo

You just resolder the 10pins or whatever for the connector, and it will fix it!

Not necessarily true. For instance my clock situation was caused by the ribbon cables actually breaking out of their solder joints. They would make contact but any jolt or bump caused them to lose contact and reset the clock.

Ever since I fixed it and re-soldered everything it has kept accurate and bright time. Only dimming when I turn on the lights (as they should).