Wiper switches

[My5ABaby]

Originally Posted by FC Zach

I have the same issue, what is the cause of this problem. Before it completely stopped working I assumed it was a bad connection at the harness so i removed it, checked for tight connection, reinstalled, and still had the same intermittent "I work when I want to" problem. I have become used to this problem and have never really cared to fix the issue but am sill curious about the cause of it

The solder joints in the clock just go bad with time. I managed to fix mine by resoldering every point in the cluster.

[vex]

Originally Posted by My5ABaby

The solder joints in the clock just go bad with time. I managed to fix mine by resoldering every point in the cluster.

I did that too, worked quite well... then I installed too much crap in my regular electronics area (gauges, etc). Now my clock continually reads 1:00 Sometimes it will work, but then something happens and it will reset to 1:00. I think it's a ground issue I caused, which is to be expected with the time constraint I was under when I installed the gages.