GB: Bi-xenon HID PROJECTOR - SakeBomb Garage

[3RotorMotor]

The new GB price is $850 shipped within the US. I'll be posting a new thread for the second GB shortly. This will be the last run on these HID lights for a long time, or possibly indefinately so if you are interested in them you've got only a couple weeks to decide. Once the GB is finalized and order for parts placed thats it... we cant squeeze anyone else in.

-Heath

[probedb]

Just a couple of pics before fitting

[3RotorMotor]

Make sure to aim them as per the directions. The aiming guide is conservative and you can raise them higher if desired so long as you use good judgment. Lets see them on the car and some night shots

[probedb]

Originally Posted by 3RotorMotor

Make sure to aim them as per the directions. The aiming guide is conservative and you can raise them higher if desired so long as you use good judgment. Lets see them on the car and some night shots

Going to sort these in the next couple of weeks and then I'll get some shots

[3RotorMotor]

We are running one final GB on the HID's. This is the last one we are going to run as the lights are really labor intensive to make and we are ready to move on to the next FD parts projects on our list.

We'll get the last GB list up tomorrow. At this point there are only a few spots left. Get in while you can. -Heath

[probedb]

I took a few shots of mine fitted and also the view in the dark

http://www.flickr.com/photos/paulsol...7594048747614/

[MaczPayne]

Woot

[3RotorMotor]

Originally Posted by probedb

I took a few shots of mine fitted and also the view in the dark

http://www.flickr.com/photos/paulsol...7594048747614/

WOW! Your car looks amazing! Love the bumper... very clean!!! You could even raise the lights up a tad for more visibility. The aiming instructions are for a standard height, so with your car lowered you can probably get away with more. Anyway the car looks great and thanks for uploading pics !!! Enjoy being able to see where you are going Cheers!

[probedb]

Originally Posted by 3RotorMotor

WOW! Your car looks amazing! Love the bumper... very clean!!! You could even raise the lights up a tad for more visibility. The aiming instructions are for a standard height, so with your car lowered you can probably get away with more. Anyway the car looks great and thanks for uploading pics !!! Enjoy being able to see where you are going Cheers!

Cheers...I was going for clean Yeah I've been trying to find somewhere to follow the instructions as they're just set to roughly what the HIDs were set to.

You can see the Feed lights there too, let's just say the quality of your lights is rather better!

I just have to see how they go through the MOT over here now.

The difference between even HIDs and these is amazing, it's like someone turned the sun on at night when on full beam And the cut off is brilliant, it's nice knowing you're not blinding people as you can see exactly where the light is going!

[3RotorMotor]

Originally Posted by probedb

Cheers...I was going for clean Yeah I've been trying to find somewhere to follow the instructions as they're just set to roughly what the HIDs were set to.

You can see the Feed lights there too, let's just say the quality of your lights is rather better!

I just have to see how they go through the MOT over here now.

The difference between even HIDs and these is amazing, it's like someone turned the sun on at night when on full beam And the cut off is brilliant, it's nice knowing you're not blinding people as you can see exactly where the light is going!

I would think you should pass MOT with flying colors. I mean I can't say for sure but there is so little light above the cutoff that I would think all that would be required is having them properly aimed. MOT has a beam analyzer correct? I'm interested to see what MOT has to say as we don't really have light checks over here in California... just really stringent smog checks.

[probedb]

Originally Posted by 3RotorMotor

I would think you should pass MOT with flying colors. I mean I can't say for sure but there is so little light above the cutoff that I would think all that would be required is having them properly aimed. MOT has a beam analyzer correct? I'm interested to see what MOT has to say as we don't really have light checks over here in California... just really stringent smog checks.

Yeah it should be fine but you never know with an MOT which is a roadworthiness test (http://en.wikipedia.org/wiki/MOT_test). It's not just lights but everything They have rules for everything including beam patterns and stuff.

Then again you'd be amazed at the number of people still manage to drive around with a headlight or brakelight out!

[TRISPEEDFD3S]

I just want to post these because I'm still amazed by the lights!

[McVicker]

Glad to hear it We need to start posting more threads on RCC.

[Mobius]

Originally Posted by McVicker

Glad to hear it We need to start posting more threads on RCC.

Yes..... yes you do. I actually had to reup my account on the other forum just so I could keep track of your Group Buys. That was a sad day.

[3RotorMotor]

Originally Posted by Mobius

Yes..... yes you do. I actually had to reup my account on the other forum just so I could keep track of your Group Buys. That was a sad day.

Yeah we have a lot of new products coming out now. The aluminum interior door handle is one of them. We'll get that posted up tonight. There is also the FC HID's , the FD HID's, the FD dual oil cooler kits (19, or 25 row), a fire extinguisher bracket for the FD, and many other projects!!