13B-REW power references

RICE RACING · 02-14-2010, 12:04 AM

http://translate.google.com/translat...m%2Findex.html

^ This has to be one of the best resources of honest power outputs for 13B-REW motors running T04R and twins around, all of the powers are calculated back to "engine power" using a 1.15 conversion on the dynapack and boost is listed in kg/cm.

Here also is some material from my own web site with dynapack dyno's with no correction factor (power at hubs listed) http://www.riceracing.com.au/water-injection.htm

Standard 13B-REW in the turbine TO4R ( Stock cut-back)

Boost: 1.32k 　トルク：57.5kg/5930rpm馬力：524.0PS/7024rpm Torque: 57.5kg/5930rpm horsepower: 524.0PS/7024rpm
ブースト：1.2ｋ Boost: 1.2k 　トルク：55.0kg/5785rpm馬力：485.3PS/6988rpm Torque: 55.0kg/5785rpm horsepower: 485.3PS/6988rpm
ブースト：1.1ｋ　トルク：51.3kg/5608rpm　馬力：459.4PS/6633rpm Boost: 1.1k torque: 51.3kg/5608rpm horsepower: 459.4PS/6633rpm

RICE RACING · 02-16-2010, 06:56 PM

Stock port 3mm seals running HKS T51R on 1.1~1.2 bar boost dynapack no TC factor (power at hubs) = 456hubhp ~524bhp

RICE RACING · 02-16-2010, 07:02 PM

My old 1st gen 13B S5 block street ported, T04S = 351hubkw = 478hubhp ~ 550bhp

Boost dyno log of Autronic ECU 2002 vintage

(sub 20psi boost) water injected
605m above seal level test facility

02-14-2010, 12:04 AM	#1
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	13B-REW power references http://translate.google.com/translat...m%2Findex.html ^ This has to be one of the best resources of honest power outputs for 13B-REW motors running T04R and twins around, all of the powers are calculated back to "engine power" using a 1.15 conversion on the dynapack and boost is listed in kg/cm. Here also is some material from my own web site with dynapack dyno's with no correction factor (power at hubs listed) http://www.riceracing.com.au/water-injection.htm Standard 13B-REW in the turbine TO4R ( Stock cut-back) Boost: 1.32k 　トルク：57.5kg/5930rpm馬力：524.0PS/7024rpm Torque: 57.5kg/5930rpm horsepower: 524.0PS/7024rpm ブースト：1.2ｋ Boost: 1.2k 　トルク：55.0kg/5785rpm馬力：485.3PS/6988rpm Torque: 55.0kg/5785rpm horsepower: 485.3PS/6988rpm ブースト：1.1ｋ　トルク：51.3kg/5608rpm　馬力：459.4PS/6633rpm Boost: 1.1k torque: 51.3kg/5608rpm horsepower: 459.4PS/6633rpm __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 02-14-2010 at 12:11 AM. Reason: Included some ref material from dynapcks on my site

02-16-2010, 06:56 PM	#2
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	Stock port 3mm seals running HKS T51R on 1.1~1.2 bar boost dynapack no TC factor (power at hubs) = 456hubhp ~524bhp __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration Last edited by RICE RACING; 02-16-2010 at 06:59 PM.

02-16-2010, 07:02 PM	#3
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	My old 1st gen 13B S5 block street ported, T04S = 351hubkw = 478hubhp ~ 550bhp Boost dyno log of Autronic ECU 2002 vintage (sub 20psi boost) water injected 605m above seal level test facility __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration