13B-REW power references
 

http://translate.google.com/translat...m%2Findex.html

^ This has to be one of the best resources of honest power outputs for 13B-REW motors running T04R and twins around, all of the powers are calculated back to "engine power" using a 1.15 conversion on the dynapack and boost is listed in kg/cm.

Here also is some material from my own web site with dynapack dyno's with no correction factor (power at hubs listed) http://www.riceracing.com.au/water-injection.htm

Standard 13B-REW in the turbine TO4R ( Stock cut-back)

Boost: 1.32k 　 トルク：57.5kg/5930rpm馬力：524.0PS/7024rpm Torque: 57.5kg/5930rpm horsepower: 524.0PS/7024rpm
ブースト：1.2ｋ Boost: 1.2k 　 トルク：55.0kg/5785rpm馬力：485.3PS/6988rpm Torque: 55.0kg/5785rpm horsepower: 485.3PS/6988rpm
ブースト：1.1ｋ　 トルク：51.3kg/5608rpm　 馬力：459.4PS/6633rpm Boost: 1.1k torque: 51.3kg/5608rpm horsepower: 459.4PS/6633rpm


http://www2u.biglobe.ne.jp/~fam/mnt/...0rx-7%2005.JPGhttp://www2u.biglobe.ne.jp/~fam/mnt/...0rx-7%2004.JPG

http://www2u.biglobe.ne.jp/~fam/mnt/...rx-7%2010b.JPG

http://www2u.biglobe.ne.jp/~fam/mnt/...rx-7%2011b.JPG

Stock port 3mm seals running HKS T51R on 1.1~1.2 bar boost dynapack no TC factor (power at hubs) = 456hubhp ~524bhp

http://www.riceracing.com.au/HKST51%...1.1barPUMP.JPG

My old 1st gen 13B S5 block street ported, T04S = 351hubkw = 478hubhp ~ 550bhp
http://www.riceracing.com.au/donsickcunt.jpg

Boost dyno log of Autronic ECU 2002 vintage :) (sub 20psi boost) water injected
605m above seal level test facility
http://www.riceracing.com.au/proof3a.jpg