Need your knowledge.

djmtsu · 03-31-2009, 07:27 PM

Yes, where the TB mounts to the UIM. There should be 3 or 4 ports on the side that faces the firewall. One is larger than the others, and that feed the oil injectors.

(pic courtesy of Rotary Resurrection)

The others cap off. Your injector regulator source is on the UIM in the middle of the injector bleed ports:

(pic courtesy of Rotary Resurrection)

If you need more guidance, go here--> http://www.rotaryresurrection.com/2n...s_removal.html

03-31-2009, 07:27 PM	#18
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Yes, where the TB mounts to the UIM. There should be 3 or 4 ports on the side that faces the firewall. One is larger than the others, and that feed the oil injectors. (pic courtesy of Rotary Resurrection) The others cap off. Your injector regulator source is on the UIM in the middle of the injector bleed ports: (pic courtesy of Rotary Resurrection) If you need more guidance, go here--> http://www.rotaryresurrection.com/2n...s_removal.html __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode