FC3S Murray's never ending build. - Page 44

barnett87rx7 · 03-12-2011, 12:13 AM

Quote:

Originally Posted by FC3S Murray

I got a hold of a cherry picker today...needless to say I am pretty damn stoked! I refuse to buy one because that is just wishing for bad joo joo.

I almost don't want to rip into her...she is still driveable and the weather is PERFECt now. Fuck!

Pic of the new house. Got it for a great price and is a wonderful home for our daughter. The FC better not break again or it is going to be sold because this S.O.B is gonna take ALL my time..

Pics will be up soon of the surgery

Congrats on the super clean fc ... but in reality 16yr olds own fc's the real congrats are on the house

FC3S Murray · 03-17-2011, 10:28 PM

POSTED A COUPLE DAYS AGO:

Soooo another day of f*ing around and sorry, no start up vid yet. I plan on trying tomorrow since I will have 3 hours free in the garage YESSSSSSSSSSSSSSSSSS!

Since I couldnt start it tonight due to my baby boy going to sleep at 6:30 and his room being right above the garage. Open headers would make him poop his diaper! However i did get some things done tonight:

Installed 2 grounds that I should have in the first place(other ground is on driverside). This fixed my cranking issue.:

Installed my Norris motorsports PCV catch can. Great product and nice qaulity:

Got in my black sparkplug wire boots....story on these is I ordered them a long time ago back when I wasnt gonna wrap my headers. Part got on back order, i forgot I ordered them due to all the other shit I ordered, they came in today lol. Figured I would sport them, they look good and to be honest I wasnt digging my red wires. :

Figured out my JTR bleeder location with upper radiator hose I was going to use. I ended up just rotating the hose and now the 'hump' is on the driver side. Now the bleeder is in the highest position.:

How she sits for start up tomorrow(intake layout is temporary of course):

FC3S Murray · 03-17-2011, 10:31 PM

Alright guys got her started......fuel pump was wired backwards duh!
Actually got it started on Tuesday but 5 min after this vid I got a call that a loved one was dying so my family and I headed out to WA. We got back yesterday.

Anyway, The motor sounds awesome and runs great. She is full of coolant in this vid since I got that low coolant sensor in that day. The vibrations from the open headers were so intense that shit was falling of my shelves and getting my attention lol.

Some parameters I recorded:

EGT's @ idle: L bank 400*F, R bank 385
Fuel Pressure: 65 psi
Idle rpm: 800-850
Wide band AFR: ......I was getting crazy #'s from 20 to 40:1 afr's...i need to calibrate the LC-1/XD-16 set-up. Maybe the sensor being installed 3'' from the open exhst pipe was throwing it for a loop
The hottest I let the coolant temp get was 195 on the GM sensor and my shitty prosport sensor was reading 220 in the passenger head. I may still have to burp it some. My fan never kicked on and I have to contact frost to see what he programmed my fans to kick on at.

All in all I am STOKED it runs!!
...you can see my dumbass here trying to bleed the coolant right after start up....it dawns on me 15 seconds later that the thermostat has to open up lol
http://www.youtube.com/watch?v=6IXLMBtc9gw#]start up

project86 · 03-17-2011, 10:36 PM

shit ya.

chibikougan · 03-18-2011, 10:34 AM

Sorry to hear about sick loved ones fella. Good to see that its runnin. Now come pick me up. Gotta seat them rings! Damn your a funny bastard and lmao at shit falling off the shelf. I like the "really?" look you gave them as they fell.

Must come ooogle is it almost BBQ time? I can actually have it at my house now.

FC3S Murray · 03-18-2011, 01:00 PM

Haha, thanks man. Yeah I was just thinking, " that shit better not of hit my car!"

I am troubleshooting a fan relay wiring issue right now. Once i get it figured out tonight I will put her on the ground. NO leaks, no high temps, no low pressures so all is well.......so far

chibikougan · 03-18-2011, 01:38 PM

Haha we can go to walmart and grab a fan to plug into the cigarette lighter when it reaches the right temp. Seriously though I used to be a mad hater on these swaps but your build has changed my mind on that completely. I haven't even rode in it yet. Get that fan figured out and get out there and Flog that biotch! Gonna be a sleeper. Normally people are very scared by the rotary noise. At least with my car with the gilmners that was my experience. First race of the year is coming up soon too. You gonna be there?

project86 · 03-18-2011, 01:50 PM

Im gonna say even though you already know but im lovin it. Clean as ever, and Clean wins no matter whats under the hood.

FC3S Murray · 03-18-2011, 03:38 PM

yes yes...give in to the darkness....muhahahaha.

Thanks a lot guys, means a lot. Yeah, I will try to get it to SCCA if all goes accordenly.

***TitaniumTT*** · 03-18-2011, 04:49 PM

Did it blow up yet? You've still got that bdc sticker on there..... it's just a matter of time

project86 · 03-18-2011, 06:05 PM

hahaha.. nope.. no darkside for me.. im going NA 20B Gmonsen style haha.

FC3S Murray · 03-18-2011, 06:20 PM

Quote:

Originally Posted by TitaniumTT

Did it blow up yet? You've still got that bdc sticker on there..... it's just a matter of time

lol...you are sucha little shit sometimes

BDC sticker gone!

MaczPayne · 03-18-2011, 09:07 PM

Nice, I love that truck sound

***TitaniumTT*** · 03-18-2011, 09:44 PM

Does sound alot like the Z71 up the street

FC3S Murray · 03-20-2011, 11:18 AM

....i hate you guys lol

03-17-2011, 10:28 PM	#647
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	*POSTED A COUPLE DAYS AGO:* Soooo another day of fing around and sorry, no start up vid yet. I plan on trying tomorrow since I will have 3 hours free in the garage YESSSSSSSSSSSSSSSSSS! Since I couldnt start it tonight due to my baby boy going to sleep at 6:30 and his room being right above the garage. Open headers would make him poop his diaper! However i did get some things done tonight: Installed 2 grounds that I should have in the first place(other ground is on driverside). This fixed my cranking issue.: Installed my Norris motorsports PCV catch can. Great product and nice qaulity: Got in my black sparkplug wire boots....story on these is I ordered them a long time ago back when I wasnt gonna wrap my headers. Part got on back order, i forgot I ordered them due to all the other shit I ordered, they came in today lol. Figured I would sport them, they look good and to be honest I wasnt digging my red wires. : Figured out my JTR bleeder location with upper radiator hose I was going to use. I ended up just rotating the hose and now the 'hump' is on the driver side. Now the bleeder is in the highest position.: How she sits for start up tomorrow(intake layout is temporary of course): __________________ Same pig, new soul Last edited by FC3S Murray; 03-17-2011 at 10:35 PM.*

03-17-2011, 10:31 PM	#648
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Alright guys got her started......fuel pump was wired backwards duh! Actually got it started on Tuesday but 5 min after this vid I got a call that a loved one was dying so my family and I headed out to WA. We got back yesterday. Anyway, The motor sounds awesome and runs great. She is full of coolant in this vid since I got that low coolant sensor in that day. The vibrations from the open headers were so intense that shit was falling of my shelves and getting my attention lol. Some parameters I recorded: EGT's @ idle: L bank 400F, R bank 385 Fuel Pressure: 65 psi Idle rpm: 800-850 Wide band AFR: ......I was getting crazy #'s from 20 to 40:1 afr's...i need to calibrate the LC-1/XD-16 set-up. Maybe the sensor being installed 3'' from the open exhst pipe was throwing it for a loop The hottest I let the coolant temp get was 195 on the GM sensor and my shitty prosport sensor was reading 220 in the passenger head. I may still have to burp it some. My fan never kicked on and I have to contact frost to see what he programmed my fans to kick on at. All in all I am STOKED it runs!! ...you can see my dumbass here trying to bleed the coolant right after start up....it dawns on me 15 seconds later that the thermostat has to open up lol http://www.youtube.com/watch?v=6IXLMBtc9gw#]start up __________________ Same pig, new soul Last edited by FC3S Murray; 03-17-2011 at 10:33 PM.*

03-17-2011, 10:36 PM	#649
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	shit ya. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-18-2011, 01:00 PM	#651
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	Haha, thanks man. Yeah I was just thinking, " that shit better not of hit my car!" I am troubleshooting a fan relay wiring issue right now. Once i get it figured out tonight I will put her on the ground. NO leaks, no high temps, no low pressures so all is well.......so far __________________ Same pig, new soul

03-18-2011, 01:50 PM	#653
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Im gonna say even though you already know but im lovin it. Clean as ever, and Clean wins no matter whats under the hood. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-18-2011, 03:38 PM	#654
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	yes yes...give in to the darkness....muhahahaha. Thanks a lot guys, means a lot. Yeah, I will try to get it to SCCA if all goes accordenly. __________________ Same pig, new soul

03-18-2011, 04:49 PM	#655
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Did it blow up yet? You've still got that bdc sticker on there..... it's just a matter of time __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-18-2011, 06:05 PM	#656
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	hahaha.. nope.. no darkside for me.. im going NA 20B Gmonsen style haha. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

03-18-2011, 09:07 PM	#658
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	Nice, I love that truck sound __________________ Johnson TA FC in the works!

03-18-2011, 09:44 PM	#659
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Does sound alot like the Z71 up the street __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-20-2011, 11:18 AM	#660
FC3S Murray frustrated! Join Date: Apr 2009 Location: Montana Posts: 611 Rep Power: 17	....i hate you guys lol __________________ Same pig, new soul

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode