|
Re-Speed www.re-speed.com (GA) Custom rotary parts, specializing in 85-older |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
09-02-2008, 11:16 AM | #1 |
Respecognize!
|
Springs / Rates for Coilover kit
i have an 82 FB setup with the GSLSE suspension. Currently i have some adjustable struts and eibach springs, but want to upgrade to the coilover kit you offer.
The only question i have is the spring length and rate. I am assuming that th shorter the spring length the lower the car sits. What is the norm for length? 7 or 8 inch? Then comes the rates, what exactly would you recommend rate wise? I am moving to colorado so the roads are smooth (and fun). The car falls under toy status and generally speaking my tolerances of harshness on the street are pretty high. I was thinking about the 2.5"x7" in a 425 to 450 rate front (mostly because i plan on running the heavier 13b and possible turbo components in the future) and getting the kit also for the rear and run with a rear 200. I currently have ST sway bars, stock otherwise. Im figuring camber plates would also be a good upgrade? Would i need them upon install of the above setup?
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook Last edited by Whizbang; 09-02-2008 at 11:21 AM.. |