|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
|
|
#16 |
|
The quest for more torque
Join Date: Sep 2008
Location: Sheboygan, Wisconsin
Posts: 855
Rep Power: 18 ![]() |
The reason that I went with an Innovate the second time, rather than buying another AEM (which has been a good product) was the ability to calibrate and the corresponding accuracy.
The Innovate gives the opportunity to calibrate the wideband frequently in free air to compensate for the long-term degradation in the actual wideband sensor. The AEM wideband (which can't be re-calibrated) can be off by up to 0.5 AFR after years of use, which could mean death to a closely-tuned turbo car. I think this is the reason that many people do not like them. At the same time, on an NA car the AEM is fine because if you shoot for 13.2:1 by the wideband, you are probably reasonably close to peak power (error range of 12.7:1 to 13.7:1, which all makes good power). Running a NA engine lean of 13.4:1 (peak power) won't hurt it, you will just lose power (no valves to burn or pistons to melt).
__________________
1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic) |
|
|
|
| Bookmarks |
|
|