|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
06-06-2013, 03:45 PM
|
#11 |
|
Rotating Assembly
Join Date: Oct 2008
Location: TX
Posts: 102
Rep Power: 17  |
Sorry, Jeff. ISC is Initial Set Connector. I believe that is the standard term. It is the single green plug near the battery/main fuses you ground whenever setting the idle. We had it on and off so much when doing the swap I made a wire with a male spade and a ring terminal. But even though it was attached to a cleaned bolt holding the main fuses to the shock tower it wasnt delivering a good signal to the ECU.
The fast idle adjustment needs to be set so that when the engine (well the wax) is cold the green topped drum is aligned with one of the marks on the cam and when hot (the piston rises) the green topped drum is aligned with the other mark on the cam. Good luck. It gets better! 
__________________
  90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode