Stock top mount, beefed up...

[sen2two]

Originally Posted by RETed

Neat to see? Yes.
Practical? I don't think so.

Not many people can weld cast aluminum.
Unless the OP is going to offer this mod to others, I don't see the benefits versus a well-engineered FMIC set-up.
I believe you can get an FMIC kit with a Made-in-China IC core for like $500 off of eBay?

I doubt this contraption will outdo an FMIC kit.


-Ted

As far as welding is concerned. Welding cast isnt much different to other aluminums. Just clean it up with a file and brush it clean with a stainless steel brush.

And no i havnt had it on a dyno. But I have used three different style intercooler set-ups on the stock turbo before this one (making this number 4). And from my own personal experience (my own set-ups and others), this is much better than a front mount. Most front mount "Ebay" intercoolers are poorly designed and hurt flow more than anything. look inside one and compare it to a well designed core and you'll see what i mean. Plus the widely used 2.5" piping hurts power more than it helps. 2.5" is MUCH to large for the stock turbo. again, most people also use a super large intercooler, further hurting the set-up. Now a correctly built V-mount will be better than what i did of course, but i dont see ANY front mount being better than a modified/aftermarket top-mount for the stock turbo.

Remember, one 90* bend is equal to 5' of pipe. Now add up length of pipe and all the bends, and the big core up front wich your air has to force its way through. what does that equal? a turbo that has to work twice as hard to make give the same amount of pressure. and a motor that has to wait twice as long to recieve it...

**also, if anyone was interested in me doing this to your top mount, PM me... thatnks for the idea.

Originally Posted by RETed

Last time I checked, a good, name-brand, entry-level TIG was going for a minimum $2,000...
Wow, wish I had that kinda equipment just sitting around.
If I had a TIG like that sitting around, there's a lot of other stuff I would be working on rather than something like this.
...but that's just me.


-Ted

I bought my complete set up for 1000. and at the time, there were atleast 3-4 other equal deals on craigslist. But i did A LOT of searching to find my deal, and i was patient onm finding the right one. If you want something, the deal is out there, you just have to find it.

and just to be clear, im not trying to battle it out with you. but you seem to have a little hater-ade in a lot of your posts. here and other places. never really see anything you like besides what you do... not open to new ideas???

myself personally... im tired of the same old, "just put a TII in it", "put a front mount", "get a GT35", ect. ect. ect.... FC's need a breath of new life. Everyone has the same set-up and the same 400 hp goal. ok i'll stop... im ranting a little here.

[sen2two]

Originally Posted by RETed

Neat to see? Yes.
Practical? I don't think so.

Not many people can weld cast aluminum.
Unless the OP is going to offer this mod to others, I don't see the benefits versus a well-engineered FMIC set-up.
I believe you can get an FMIC kit with a Made-in-China IC core for like $500 off of eBay?

I doubt this contraption will outdo an FMIC kit.


-Ted

As far as welding is concerned. Welding cast isnt much different to other aluminums. Just clean it up with a file and brush it clean with a stainless steel brush.

And no i havnt had it on a dyno. But I have used three different style intercooler set-ups on the stock turbo before this one (making this number 4). And from my own personal experience (my own set-ups and others), this is much better than a front mount. Most front mount "Ebay" intercoolers are poorly designed and hurt flow more than anything. look inside one and compare it to a well designed core and you'll see what i mean. Plus the widely used 2.5" piping hurts power more than it helps. 2.5" is MUCH to large for the stock turbo. again, most people also use a super large intercooler, further hurting the set-up. Now a correctly built V-mount will be better than what i did of course, but i dont see ANY front mount being better than a modified/aftermarket top-mount for the stock turbo.

Remember, one 90* bend is equal to 5' of pipe. Now add up length of pipe and all the bends, and the big core up front wich your air has to force its way through. what does that equal? a turbo that has to work twice as hard to make give the same amount of pressure. and a motor that has to wait twice as long to recieve it...

**also, if anyone was interested in me doing this to your top mount, PM me... thatnks for the idea.

Originally Posted by RETed

Last time I checked, a good, name-brand, entry-level TIG was going for a minimum $2,000...
Wow, wish I had that kinda equipment just sitting around.
If I had a TIG like that sitting around, there's a lot of other stuff I would be working on rather than something like this.
...but that's just me.


-Ted

I bought my complete set up for 1000. and at the time, there were atleast 3-4 other equal deals on craigslist. But i did A LOT of searching to find my deal, and i was patient onm finding the right one. If you want something, the deal is out there, you just have to find it.

and just to be clear, im not trying to battle it out with you. but you seem to have a little hater-ade in a lot of your posts. here and other places. never really see anything you like besides what you do... not open to new ideas???

myself personally... im tired of the same old, "just put a TII in it", "put a front mount", "get a GT35", ect. ect. ect.... FC's need a breath of new life. Everyone has the same set-up and the same 400 hp goal. ok i'll stop... im ranting a little here.