Custom Brake Rotor hats..

***Herblenny*** · 11-18-2009, 02:45 PM

I'm curious.. Is it hard to get custom brake rotor hats for 2 piece rotors?

djmtsu · 11-18-2009, 04:45 PM

I don't know man. That is a precision piece, which would also carry alot of liability on the part of the manufacturer.

***TitaniumTT*** · 11-18-2009, 05:49 PM

What are you trying to accomplish Phil? If you're looking to replace some stock rotors with two piece rotors, than the manufacturer of the 2-piece rotors should have already taken all the measurements etc for the hats and rotors themselves. If you're looking to have one made off of an existing rotor, then you should be able to send them the rotor that you're looking to replace and they should be able to replicate the offset etc.

If you're looking to have a custom setup made, you should be able to send them a knuckle and the rim you're using and they should be able to build everything needed. Hats, rotors, adapters etc.

Flys · 11-22-2009, 11:55 PM

Try Wilwood's site, I remember reading on there some where about custom hats. Or browse their selection..

http://www.wilwood.com/HatList1.aspx

11-18-2009, 02:45 PM	#1
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Custom Brake Rotor hats.. I'm curious.. Is it hard to get custom brake rotor hats for 2 piece rotors? __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

11-18-2009, 04:45 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	I don't know man. That is a precision piece, which would also carry alot of liability on the part of the manufacturer. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-18-2009, 05:49 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	What are you trying to accomplish Phil? If you're looking to replace some stock rotors with two piece rotors, than the manufacturer of the 2-piece rotors should have already taken all the measurements etc for the hats and rotors themselves. If you're looking to have one made off of an existing rotor, then you should be able to send them the rotor that you're looking to replace and they should be able to replicate the offset etc. If you're looking to have a custom setup made, you should be able to send them a knuckle and the rim you're using and they should be able to build everything needed. Hats, rotors, adapters etc. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-22-2009, 11:55 PM	#4
Flys The Newbie Join Date: Dec 2008 iTrader: (0) Posts: 7 Rep Power: 0	Try Wilwood's site, I remember reading on there some where about custom hats. Or browse their selection.. http://www.wilwood.com/HatList1.aspx