Modified Rats Nest for the FD

Garfinkles Motor Works · 04-21-2009, 08:14 PM

Here is a part I have made for a few guys here local and have been asked by several to offer them for sale. Tell me what you think...

Heeley · 04-21-2009, 11:15 PM

what would be the probable cost, and does it retain all the stock functionality & emissions

Garfinkles Motor Works · 04-22-2009, 04:23 AM

Your old rack is modified to hold the solinoids you wont and the studed turbocontrol sol .The vacuum tubes are steel and everything is brazed together ,No J B weld or glue . The job takes about 4 to 5 hours because of the time to make the tubes . The cost will be between $ 125 and $ 140 . Someone Pm Chadwick to post pict of his .

Brent · 04-22-2009, 05:40 AM

I like it. Once I get around to simplifying my set up this summer, I will be giving you a call.

bbade · 04-24-2009, 02:58 AM

Is this a simplified sequential setup? Or is this for non-seq setups only?

Garfinkles Motor Works · 04-24-2009, 07:19 AM

I can make it to hold any number of solinoids . How many do you need for non seq ? All the ones I have done in the past are for simplified seq .I mod the manifold and turbo hot sides and port the wastgate for my non seq Rich Mans Non Seq set up .Check into that for faster spooling and flow for non seq .

MaD^94Rx7 · 04-30-2009, 01:25 AM

can you make this work on jdm?

Garfinkles Motor Works · 04-30-2009, 07:13 AM

I can make it to your needs ,how many solinoids do ou need to hold ?

MaD^94Rx7 · 05-04-2009, 12:22 PM

i'll have to get back to you about that...

Prometheus · 06-15-2009, 05:27 PM

This is great.

Garfinkles Motor Works · 01-08-2011, 10:27 AM

Do not throw away your old rack, I can use them to make your simplified rack .

Garfinkles Motor Works · 10-24-2012, 08:34 AM

Finished with this no more to be done,sorry

04-22-2009, 05:40 AM	#4
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	I like it. Once I get around to simplifying my set up this summer, I will be giving you a call. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

04-24-2009, 02:58 AM	#5
bbade Rotary Fanatic Join Date: Mar 2008 Location: Macungie, PA Posts: 163 Rep Power: 18	Is this a simplified sequential setup? Or is this for non-seq setups only? __________________ Proud owner of a base 1993 Montego Blue FD. PFC, RB single tip, Koyo Radiator, KDR rebuilt motor, polished OEM front strut bar, FEED replica sideskirts, OEM 99 spec rear spoiler, SuperPro Bushings Many thanks to Dave at KDR for sparking my rotor addiction.

04-30-2009, 01:25 AM	#7
MaD^94Rx7 The Newbie Join Date: Apr 2009 Posts: 11 Rep Power: 0	Jdm can you make this work on jdm?

10-24-2012, 08:34 AM	#12
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Finished with this no more to be done,sorry Last edited by ZGN; 10-24-2012 at 09:25 AM.

04-21-2009, 11:15 PM	#2
Heeley Rotary Fan in Training Join Date: Mar 2008 Location: Snowbelt, Ontario! Posts: 57 Rep Power: 18	what would be the probable cost, and does it retain all the stock functionality & emissions

04-22-2009, 04:23 AM	#3
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Your old rack is modified to hold the solinoids you wont and the studed turbocontrol sol .The vacuum tubes are steel and everything is brazed together ,No J B weld or glue . The job takes about 4 to 5 hours because of the time to make the tubes . The cost will be between $ 125 and $ 140 . Someone Pm Chadwick to post pict of his .

04-24-2009, 07:19 AM	#6
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I can make it to hold any number of solinoids . How many do you need for non seq ? All the ones I have done in the past are for simplified seq .I mod the manifold and turbo hot sides and port the wastgate for my non seq Rich Mans Non Seq set up .Check into that for faster spooling and flow for non seq .

04-30-2009, 07:13 AM	#8
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I can make it to your needs ,how many solinoids do ou need to hold ?

05-04-2009, 12:22 PM	#9
MaD^94Rx7 The Newbie Join Date: Apr 2009 Posts: 11 Rep Power: 0	i'll have to get back to you about that...

06-15-2009, 05:27 PM	#10
Prometheus Rotary Fan in Training Join Date: Feb 2008 Location: Portland, Oregon/ Vancouver, Washington Area Posts: 49 Rep Power: 0	This is great.

01-08-2011, 10:27 AM	#11
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Do not throw away your old rack, I can use them to make your simplified rack .