Garfinkle's Custom 99 Rotor Cross drill (ton of pics)!

***Herblenny*** · 03-01-2009, 12:39 PM

Well, I was searching for some cross drilled rotors to replace my 99 spec rotors.. But after searching and realized how expensive it could be (800-900 for JUST fronts), I've decided to take my near new 99 Stock rotors to Garfinkle.

I'll be honest, I was mainly looking for look vs. function (but 99 brakes are noticeably better in general vs stock 93+).

Anyhow, I am super happy with the results. Garfinkle worked out the harmonics of cross drilling and counter sunk ever hole! This particular custom drilling took him many hours of planning and many hours to drill (as you could see by number of holes).

Also drilling probably lessen the weight of the rotors by couple of pounds (i didn't think to weigh it, but did feel lighter).

If you have 99 rotors or any other rotors you want to custom drill, definitely sent them to Garfinkle! He knows what he's doing.

This particular job will cost you $250 + shipping. Personally, I think its worth the work! I'm going to put them on today and will post some pics on the car.. Mean while, please look at the rotors off the car.

85rx-7gsl-se · 03-01-2009, 07:22 PM

Looks great

***Herblenny*** · 03-17-2009, 10:38 PM

Here are the rotors on the car..

I really like the looks of it.. I haven't seen anything like this on an FD!!

Fantastic Job by David Garfinkle!!!

fire85gslse · 03-23-2009, 05:58 PM

Alot of man hours, I was there! The pics don't do these justice, truly a work of art

Garfinkles Motor Works · 06-09-2009, 08:26 AM

I painted the rotors and calibers on my SC430 .I will drill then when I get the time .This detail on my FD is really noted by alot of people at the shows and cruiseins .

SyndicateMotorsports · 08-15-2010, 08:43 PM

looks to be very high quality and the hole placement looks very visually appealing

Garfinkles Motor Works · 10-18-2010, 10:32 PM

I did a set for a SLK 280 and painted the calibers red to mach the cars color ,looks good

03-01-2009, 12:39 PM	#1
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Garfinkle's Custom 99 Rotor Cross drill (ton of pics)! Well, I was searching for some cross drilled rotors to replace my 99 spec rotors.. But after searching and realized how expensive it could be (800-900 for JUST fronts), I've decided to take my near new 99 Stock rotors to Garfinkle. I'll be honest, I was mainly looking for look vs. function (but 99 brakes are noticeably better in general vs stock 93+). Anyhow, I am super happy with the results. Garfinkle worked out the harmonics of cross drilling and counter sunk ever hole! This particular custom drilling took him many hours of planning and many hours to drill (as you could see by number of holes). Also drilling probably lessen the weight of the rotors by couple of pounds (i didn't think to weigh it, but did feel lighter). If you have 99 rotors or any other rotors you want to custom drill, definitely sent them to Garfinkle! He knows what he's doing. This particular job will cost you $250 + shipping. Personally, I think its worth the work! I'm going to put them on today and will post some pics on the car.. Mean while, please look at the rotors off the car. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-23-2009, 05:58 PM	#4
fire85gslse RCC Addict Join Date: Feb 2008 Location: Middle TN Posts: 1,029 Rep Power: 19	Alot of man hours, I was there! The pics don't do these justice, truly a work of art __________________ I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit)

06-09-2009, 08:26 AM	#5
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I painted the rotors and calibers on my SC430 .I will drill then when I get the time .This detail on my FD is really noted by alot of people at the shows and cruiseins .

08-15-2010, 08:43 PM	#6
SyndicateMotorsports The Newbie Join Date: Oct 2009 Posts: 12 Rep Power: 0	looks to be very high quality and the hole placement looks very visually appealing

10-18-2010, 10:32 PM	#7
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	I did a set for a SLK 280 and painted the calibers red to mach the cars color ,looks good