My 20B breakdown...

***Herblenny*** · 02-09-2009, 09:51 AM

Well, Finally we've decided to break down the 20B.. Here are few pics..

Kwerks · 02-09-2009, 10:07 AM

Come on I know you must have more photos than that =)

War Eagle · 02-09-2009, 11:02 AM

Phil, what's the scoop on the engine? One you have had around and are just now getting to rebuilding. Where did it come from and what are your plans?

***Herblenny*** · 02-09-2009, 12:11 PM

David,

I have two 20Bs.

The one pictured is a number series that I'm planning to go NA with with S5 high compression rotors (like Gordon's) and 13b housings. The housing and everything looks really good (very low miles) except one rotor and housing...

The other one is D series 20B which will be built and cranked on a table by end of this month. That one will be a turbo'd 3 rotor. It will be ported (bit bigger than stock) with exhaust sleeves taken out for better flow. I'll have videos of the engine cranked on a table when its ready

Jeff20B · 02-09-2009, 12:23 PM

Herblenny, about the exhaust sleeves, were you leaving them out, or will you throw in some T2 sleeves?

***Herblenny*** · 02-09-2009, 01:13 PM

I believe we are going to put 13B REW sleeves.

Jeff20B · 02-09-2009, 02:01 PM

Ok, thanks. Looks like I'll need to pick up one more T2 sleeve for mine.

vincentrx7 · 02-09-2009, 09:07 PM

Phil, What are you going to put it in?...your RX8??????? That would be cool!

***Herblenny*** · 02-09-2009, 10:56 PM

Quote:

Originally Posted by vincentrx7

Phil, What are you going to put it in?...your RX8??????? That would be cool!

I'm going to put them in the FD... then something else

need RX7 · 02-09-2009, 11:51 PM

Quote:

Originally Posted by Herblenny

I'm going to put them in the FD... then something else

My FC?

gmonsen · 02-21-2009, 11:29 PM

Phil... Will it be ready for DGRR?

***Herblenny*** · 02-21-2009, 11:31 PM

Gordon, Most likely its not going to be ready

If the engine is ready, I might bring it up there for people to see. But not in the car.. I'm still quite a bit away from finishing the car.. If I could just get the car running with 13B-RE, I'll be happy.

gmonsen · 02-21-2009, 11:36 PM

Gottcha...

Gordon

Rotary13B1 · 03-04-2009, 01:39 PM

*bowing down* to TWO 20B motors...Hurry up and get it running Phil.

***Herblenny*** · 03-04-2009, 02:46 PM

Quote:

Originally Posted by Rotary13B1

*bowing down* to TWO 20B motors...Hurry up and get it running Phil.

I'm working on it

I think the FI motor will be done in next 2 weeks.. I had a last minute change of things and we are now designing few things by No Limit Industries. Todd, the owner is going to build some cool stuff for this motor (pressure to Todd

).

02-09-2009, 10:07 AM	#2
Kwerks FD Spirit Join Date: Dec 2008 Posts: 29 Rep Power: 0	Come on I know you must have more photos than that =) __________________ Understeer is when you hit the wall with the front of the car and oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall, torque is how far you take the wall with you.

02-09-2009, 12:11 PM	#4
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	David, I have two 20Bs. The one pictured is a number series that I'm planning to go NA with with S5 high compression rotors (like Gordon's) and 13b housings. The housing and everything looks really good (very low miles) except one rotor and housing... The other one is D series 20B which will be built and cranked on a table by end of this month. That one will be a turbo'd 3 rotor. It will be ported (bit bigger than stock) with exhaust sleeves taken out for better flow. I'll have videos of the engine cranked on a table when its ready __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

02-09-2009, 01:13 PM	#6
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	I believe we are going to put 13B REW sleeves. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

02-09-2009, 09:07 PM	#8
vincentrx7 20b FD Join Date: Apr 2008 Posts: 105 Rep Power: 18	Phil, What are you going to put it in?...your RX8??????? That would be cool! __________________ Bobby '93 20b RX-7

02-21-2009, 11:29 PM	#11
gmonsen The Ancient One Join Date: Mar 2008 Location: Eastern Pennsylvania Posts: 144 Rep Power: 18	Phil... Will it be ready for DGRR? __________________ 1993 Rx7 R1 20b NA 1994 Rx7 20b supercharged project 1991 BMW 850 6 speed 1991 BMW E30 M3 Evo II

02-09-2009, 11:02 AM	#3
War Eagle Rotary Fanatic Join Date: Apr 2008 Posts: 240 Rep Power: 18	Phil, what's the scoop on the engine? One you have had around and are just now getting to rebuilding. Where did it come from and what are your plans?

02-09-2009, 12:23 PM	#5
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	Herblenny, about the exhaust sleeves, were you leaving them out, or will you throw in some T2 sleeves?

02-09-2009, 02:01 PM	#7
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	Ok, thanks. Looks like I'll need to pick up one more T2 sleeve for mine.

02-21-2009, 11:31 PM	#12
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Gordon, Most likely its not going to be ready If the engine is ready, I might bring it up there for people to see. But not in the car.. I'm still quite a bit away from finishing the car.. If I could just get the car running with 13B-RE, I'll be happy. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

02-21-2009, 11:36 PM	#13
gmonsen The Ancient One Join Date: Mar 2008 Location: Eastern Pennsylvania Posts: 144 Rep Power: 18	Gottcha... Gordon __________________ 1993 Rx7 R1 20b NA 1994 Rx7 20b supercharged project 1991 BMW 850 6 speed 1991 BMW E30 M3 Evo II

03-04-2009, 01:39 PM	#14
Rotary13B1 Rotary Fanatic Join Date: Feb 2008 Location: SoCal Posts: 242 Rep Power: 18	bowing down to TWO 20B motors...Hurry up and get it running Phil.