|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
09-09-2008, 05:18 PM | #1 |
Respecognize!
|
Removed emissions, car runs bad at low rpms.
trying to figure out where something went wrong. I also removed the thermowax, so i expected some cold resistance towards idling but this is also just plaining running bad at low rpms.
Did most of the emission removal (left the spider rack since i didnt have fuel line) but now the car seems to run real choppy up til 2000 rpms..... I am running the FPR off the bottom vac nipple on the back of the UIM. That showed vacuum on the boost gauge, where as the top two didnt. So i am sure the FPR is seeing signal. Other than that, the pressure sensor is seeing signal as well. I can find no obvious vacuum leaks, but i wont rule any out, i just double checked the hell out of everything and i can't find it. TPS and coolant sensor are plugged in. any ideas?
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
09-09-2008, 06:24 PM | #2 | |
FUCK the fucking fuckers
Join Date: Mar 2008
Location: THE only Bay Area, Northern California
iTrader: (7)
Posts: 3,172
Rep Power: 20 |
did you check to make sure your TPS is within specs? Take a break and go over everything once you're calm.
__________________
Quote:
|
|
09-09-2008, 09:20 PM | #3 |
Respecognize!
|
so curve ball here.
figure out a few things, but the end issue is that throttle is now getting stuck at high rpms. I pull the TB out and sure as hell the butter flys are getting stuck. I removed the secondary butterflys and related. Interesting fact here. I HAVE SIDE TO SIDE PLAY IN THE RODS AND BUTTERFLYS. Almost 1 to 1.5mm. I think this might be problem.... I can still feel it binding in the primary. I used about 10 dollars worth of throttle body cleaner, felt better. Seemed to actually work, but i stalled it. fired it up touched the throttle...bam....5000 rpms...and staying. So i think i need a new throttle body.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |