FS: S4 T2 rotors and housings

Stanello · 04-27-2008, 11:23 PM

Everything here came from a strong running engine that had an oil seal problem. Cold compression numbers were 105 all around on the front and 95 all around on the rear.

My paypal address is: stanello@gmail.com

I've got a set of S4 T2 rotors that are clean, with useable bearings. They are a "D" and an "E" weight

$125 Shipped each or $200 Shipped for both.

I also have a set of S4 T2 housings in good shape.

Housing 1 is $150 Shipped
Housing 2 is $200 Shipped
Or both for $300 Shipped

Housing 1: Has normal S4 edge wear, and a bit of chrome flaking. Also has a moderate amount of light marks above the trailing plug hole. These marks are not deep, and you cannot catch a fingernail on them.

Housing 2: Has normal S4 edge wear and no chrome flaking. Has much less marks over the trailing plug hole and they are very light. You cannot catch a fingernail on them. This is one of the better used S4 housings I've came across.

Stanello · 05-07-2008, 05:36 PM

Rotors sold

04-27-2008, 11:23 PM	#1
Stanello L Casei Immunitas Join Date: Feb 2008 Location: San Francisco, CA iTrader: (0) Posts: 14 Rep Power: 0	FS: S4 T2 rotors and housings Everything here came from a strong running engine that had an oil seal problem. Cold compression numbers were 105 all around on the front and 95 all around on the rear. My paypal address is: stanello@gmail.com I've got a set of S4 T2 rotors that are clean, with useable bearings. They are a "D" and an "E" weight $125 Shipped each or $200 Shipped for both. I also have a set of S4 T2 housings in good shape. Housing 1 is $150 Shipped Housing 2 is $200 Shipped Or both for $300 Shipped Housing 1: Has normal S4 edge wear, and a bit of chrome flaking. Also has a moderate amount of light marks above the trailing plug hole. These marks are not deep, and you cannot catch a fingernail on them. Housing 2: Has normal S4 edge wear and no chrome flaking. Has much less marks over the trailing plug hole and they are very light. You cannot catch a fingernail on them. This is one of the better used S4 housings I've came across.

05-07-2008, 05:36 PM	#2
Stanello L Casei Immunitas Join Date: Feb 2008 Location: San Francisco, CA iTrader: (0) Posts: 14 Rep Power: 0	Rotors sold