|
How To Use The Forum If you have questions about how to use this forum or any of it's features please post them here! |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
The Newbie
|
![]()
So the story is, my friend wanted to install a double din in my car, 93 rx7. We ended up taking all the panels off and pulled back the cluster, to end up finding out we didn't have to do that period. Well we pulled out the stock CD player and was about to remove the stock radio, but couldn't get out hands on the harness and didn't want to rip any wires. So we put very thing back together.. I checked the vehicle to see if everything was working properly. Everything was fine.. Did all my headlight and turn signal and hazards light. Then it took a dump on me. I cannot turn on my head light and hazard doesn't work. I can press the button to make the head light pop up and the high beam will work but not the regular light, turn signal or hazard. Please help
|
![]() |
![]() |
![]() |
#2 |
rotaryevolution.net
|
![]()
check the fuses first, may have pinched a wire in the controlling circuit. although the headlight switch is on the column so... check the wiring around the steering column under the dash for any pinched wires.
|
![]() |
![]() |