FS: 93 20B Red for 19K.

alvaspeed · 08-19-2011, 04:55 AM

I am selling this 3 rotor FD for $19,000.
The conversion stil has the stock turbos with a custom downpipe modification making these breathe a little better than the typical stock turbo'd 20B. It also has dual Earls oil coolers w/ AN fittings and SS lines and a Koyo radiator, I can sincerely say that the car runs pretty cool for a 3 rotor. Also has Ground control coilovers. As fo the ECU, it is controlled by a Microtec LT-12s.
Now the car does have a rebuilt title, but I cannot really see any damage from under the car, only visible evidence is the front clip in front of the suspension strut towers which is a much better situation than any pre strut damage, this is the reason for the low price considering a 20B swap alone will cost you almost 20K. In the time I have been drivig the car I can honestly say that it drives straight and is fun to drive.
Price is negotiable (to and extent), but please no trades. I have had this on the other forum and have gotten a lot of offers to trade, but unless there is cash involved I cannot even consider it.

alvaspeed · 09-09-2011, 07:36 AM

I am willing to take $19K obo. This is a bargain as most of us know that the conversion alone costs more than this!
If I can't sell soon I will continue to modify and asking price will go up in the amounts I spend.
BTW this price is for Rotary Car club members only. So don't leak to the OTHER FORUM.

alvaspeed · 09-20-2011, 05:56 PM

Bump.

Come on, someone has got to be intrested in a 3 rotor FD at this price, regardless of title issues which I can personally guarantee are not to be of concern in drivability. The resale issue is the only reason that is justifiable, but in my opinion if you are buying this to resell, then too bad, this is for a true rotary fanatic to enjoy.

alvaspeed · 11-25-2011, 06:23 PM

Was off for a while because I thought I had a serious buyer who actually gave a deposit, however sale did not go through.

I am willing to sell this car at a negotiated rate. PM me with reasonable offers and I may just consider it.

alvaspeed · 02-28-2012, 10:27 PM

Bump.

Ayoitsdavid · 02-29-2012, 04:50 PM

Drool...

neit_jnf · 02-29-2012, 06:19 PM

Can you post more details? who did the conversion? was the 20b rebuilt? ported? etc?

A-B-C-D code? dynoed? etc etc

sent you a pm

alvaspeed · 03-05-2012, 10:06 PM

It was rebuilt less than 2k miles ago exhaust ports were replaced with fd sleeves. It was originally done by Autotech motorsports. The block is a non letter series. Chassi has 115k miles.

jordanowski · 03-13-2012, 12:45 PM

still for sale?

alvaspeed · 05-06-2012, 07:05 PM

No it sold, sorry.

Mod's please close this thread.

XxSHiFTxX · 05-21-2013, 06:58 PM

Fuck dude, that's a nice RX7.

08-19-2011, 04:55 AM	#1
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	FS: 93 20B Red for 19K. I am selling this 3 rotor FD for $19,000. The conversion stil has the stock turbos with a custom downpipe modification making these breathe a little better than the typical stock turbo'd 20B. It also has dual Earls oil coolers w/ AN fittings and SS lines and a Koyo radiator, I can sincerely say that the car runs pretty cool for a 3 rotor. Also has Ground control coilovers. As fo the ECU, it is controlled by a Microtec LT-12s. Now the car does have a rebuilt title, but I cannot really see any damage from under the car, only visible evidence is the front clip in front of the suspension strut towers which is a much better situation than any pre strut damage, this is the reason for the low price considering a 20B swap alone will cost you almost 20K. In the time I have been drivig the car I can honestly say that it drives straight and is fun to drive. Price is negotiable (to and extent), but please no trades. I have had this on the other forum and have gotten a lot of offers to trade, but unless there is cash involved I cannot even consider it. Last edited by alvaspeed; 03-15-2012 at 03:33 AM.. Reason: price revision

09-09-2011, 07:36 AM	#2
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	I am willing to take $19K obo. This is a bargain as most of us know that the conversion alone costs more than this! If I can't sell soon I will continue to modify and asking price will go up in the amounts I spend. BTW this price is for Rotary Car club members only. So don't leak to the OTHER FORUM. Last edited by alvaspeed; 03-15-2012 at 03:34 AM.. Reason: Price

09-20-2011, 05:56 PM	#3
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	Bump. Come on, someone has got to be intrested in a 3 rotor FD at this price, regardless of title issues which I can personally guarantee are not to be of concern in drivability. The resale issue is the only reason that is justifiable, but in my opinion if you are buying this to resell, then too bad, this is for a true rotary fanatic to enjoy. Last edited by alvaspeed; 10-03-2011 at 07:40 AM..

11-25-2011, 06:23 PM	#4
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	Was off for a while because I thought I had a serious buyer who actually gave a deposit, however sale did not go through. I am willing to sell this car at a negotiated rate. PM me with reasonable offers and I may just consider it. Last edited by alvaspeed; 02-28-2012 at 10:28 PM.. Reason: Sale did not go through.

05-21-2013, 06:58 PM	#11
XxSHiFTxX The Newbie Join Date: Feb 2013 iTrader: (0) Posts: 1 Rep Power: 0	Fuck dude, that's a nice RX7. Last edited by ZGN; 05-22-2013 at 08:54 AM..

02-28-2012, 10:27 PM	#5
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	Bump.

02-29-2012, 04:50 PM	#6
Ayoitsdavid The Newbie Join Date: Feb 2012 iTrader: (0) Posts: 10 Rep Power: 0	Drool...

02-29-2012, 06:19 PM	#7
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico iTrader: (0) Posts: 99 Rep Power: 17	Can you post more details? who did the conversion? was the 20b rebuilt? ported? etc? A-B-C-D code? dynoed? etc etc sent you a pm

03-05-2012, 10:06 PM	#8
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	It was rebuilt less than 2k miles ago exhaust ports were replaced with fd sleeves. It was originally done by Autotech motorsports. The block is a non letter series. Chassi has 115k miles.

03-13-2012, 12:45 PM	#9
jordanowski The Newbie Join Date: Mar 2012 iTrader: (0) Posts: 8 Rep Power: 0	still for sale?

05-06-2012, 07:05 PM	#10
alvaspeed Rotary Fan in Training Join Date: Jun 2009 iTrader: (1) Posts: 35 Rep Power: 0	No it sold, sorry. Mod's please close this thread.