|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
04-02-2011, 01:41 PM | #1 |
I fly drones & film crap.
|
HeadLight Electrical Guru Needed.
I don't have the patience to read wireing diagrams but I might have to
If you have knowledge of the headlight switch in a RHD FD 1992 maybe you can help out. The LHD FD might be the same, not sure. There are three wires that go into the switch for the headlights. red, green and black, the green and black control the parking and dash lights. Does the red control the headlights? if so, how? It seems to have a constant + voltage to it. Also my keyswitch light on the steering column seems to NEVER turn off. Many Thanks!
__________________
Kevin |
04-02-2011, 02:15 PM | #2 |
I fly drones & film crap.
|
the low beams are always on even with the Green/Black/Red disconected.
but they go off when the highbeam is switched on. I hate these types of problems... I think something in the harness is shorted out.
__________________
Kevin |
04-02-2011, 03:06 PM | #3 |
I fly drones & film crap.
|
in the headlight conntecor wires, the Ground and Red/white, silver dotted have continuity with the headlight fuse out and relay out.
This may be my short. still trying to make sense of the diagrams but I don't think these 2 wires should have continuity.
__________________
Kevin Last edited by ZGN; 04-02-2011 at 03:17 PM.. |