FS: 20B engine plus more parts and Haltech E11V2

Bryan@BNR · 02-01-2011, 11:55 PM

Hello all.

I have a number series 20B/3 rotor engine for sale $2750.

I have taken the turbos off to see condition of the combustion chamber and apex seals. Rotor housings look great and irons look good. All faces seem to be in good shape. The intake manifolds havent been cracked open. I have new manifold gaskets that go with it.

Also I have an B series engine minus an E shaft and thick iron and rotors. I originally traded a bunch of engine parts to Cam Worth at Pettit Racing for this 20B. I have most everything else. 20B rotor housings are in incredible shape. All the irons are in good shape as well. I am selling the thick iron seperate because it is brand new. It comes with oil pan, all the front cover parts, counterweight, flex plate/counter weight, lower and upper intake manifolds, fuel rails, tension bolts front and back, 20B motor mounts ect. I think the rest of the 20B parts are worth atleast $1350.

I also have a haltech E11 V2 for sale. I bought this new from Ari Yallon at Rotary Performance. I have seperated the wires getting it ready for installation, but haven't ever used it. It can run the 20B. It has all the sensor connectors and some of the sensors come with it.

Number series 20B engine $2750
B series 20B parts engine $1350
Haltech E11v2 $1250

I'd prefer if someone paid me $4500 cash for it all.

Bryan@BNR
205 640 1193

djmtsu · 02-02-2011, 07:39 AM

All of it as in $4500 for the two motors and Haltech?

lt1_fd3s · 02-02-2011, 08:18 AM

...i must finish current projects before spending $$ on parts for another project... i must finish current projects before spending $$ on parts for another project...i must finish current projects before spending $$ on parts for another project...i must finish current projects before spending $$ on parts for another project...

Good luck with the sell...

1twistedrx7 · 02-02-2011, 09:36 AM

ohhh so very tempting!

djmtsu · 02-02-2011, 09:40 AM

I know. I could throw it in the Cosmo and run it NA.....dammit!

To_Slow · 02-02-2011, 10:32 AM

How much for the new thick center plate?

Bryan@BNR · 02-02-2011, 05:27 PM

Hey To Slow.

$1500 for the new thick iron. It has the thicker dowel from the D series.

Bryan@BNR

Bryan@BNR · 02-02-2011, 05:29 PM

Quote:

Originally Posted by djmtsu

All of it as in $4500 for the two motors and Haltech?

Yes sir. The parts engine comes without an E shaft or thick iron and the rotors. I forgot to mention the rotors aren't there either. I'll go and edit that.

My5ABaby · 02-02-2011, 05:38 PM

Quote:

Originally Posted by djmtsu

I know. I could throw it in the Cosmo and run it NA.....dammit!

Or turbo...

To_Slow · 02-02-2011, 08:09 PM

You got mail...

Bryan@BNR · 02-03-2011, 03:15 PM

New Thick center iron still for sale.

rotarylyman · 02-13-2011, 05:11 PM

can you send me pics...

Bryan@BNR · 02-25-2011, 01:06 AM

All parts are sold... Thanks RCC!

***ZGN*** · 02-25-2011, 02:03 AM

Thank you!!!!

***Herblenny*** · 02-25-2011, 05:40 PM

Did Kevin buy it??

02-01-2011, 11:55 PM	#1
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	FS: 20B engine plus more parts and Haltech E11V2 Hello all. I have a number series 20B/3 rotor engine for sale $2750. I have taken the turbos off to see condition of the combustion chamber and apex seals. Rotor housings look great and irons look good. All faces seem to be in good shape. The intake manifolds havent been cracked open. I have new manifold gaskets that go with it. Also I have an B series engine minus an E shaft and thick iron and rotors. I originally traded a bunch of engine parts to Cam Worth at Pettit Racing for this 20B. I have most everything else. 20B rotor housings are in incredible shape. All the irons are in good shape as well. I am selling the thick iron seperate because it is brand new. It comes with oil pan, all the front cover parts, counterweight, flex plate/counter weight, lower and upper intake manifolds, fuel rails, tension bolts front and back, 20B motor mounts ect. I think the rest of the 20B parts are worth atleast $1350. I also have a haltech E11 V2 for sale. I bought this new from Ari Yallon at Rotary Performance. I have seperated the wires getting it ready for installation, but haven't ever used it. It can run the 20B. It has all the sensor connectors and some of the sensors come with it. Number series 20B engine $2750 B series 20B parts engine $1350 Haltech E11v2 $1250 I'd prefer if someone paid me $4500 cash for it all. Bryan@BNR 205 640 1193 Last edited by Bryan@BNR; 02-02-2011 at 05:30 PM..

02-02-2011, 07:39 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	All of it as in $4500 for the two motors and Haltech? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-02-2011, 08:18 AM	#3
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC iTrader: (3) Posts: 780 Rep Power: 17	...i must finish current projects before spending $$ on parts for another project... i must finish current projects before spending $$ on parts for another project...i must finish current projects before spending $$ on parts for another project...i must finish current projects before spending $$ on parts for another project... Good luck with the sell... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

02-02-2011, 09:36 AM	#4
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 iTrader: (11) Posts: 411 Rep Power: 0	ohhh so very tempting! __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

02-02-2011, 09:40 AM	#5
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	I know. I could throw it in the Cosmo and run it NA.....dammit! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-02-2011, 10:32 AM	#6
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	How much for the new thick center plate? __________________ My link

02-02-2011, 05:27 PM	#7
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	Hey To Slow. $1500 for the new thick iron. It has the thicker dowel from the D series. Bryan@BNR

02-02-2011, 08:09 PM	#10
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	You got mail... __________________ My link

02-03-2011, 03:15 PM	#11
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	New Thick center iron still for sale. Last edited by Bryan@BNR; 02-07-2011 at 12:31 AM..

02-13-2011, 05:11 PM	#12
rotarylyman Do Work!! Join Date: Apr 2009 iTrader: (2) Posts: 38 Rep Power: 0	can you send me pics... __________________ Rotary Son!!

02-25-2011, 01:06 AM	#13
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	All parts are sold... Thanks RCC!

02-25-2011, 02:03 AM	#14
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	Thank you!!!! __________________ Kevin

02-25-2011, 05:40 PM	#15
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	Did Kevin buy it?? __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny