Goopy Performance's Oversized main Engine Bolts provide a better alternative to the usual dowel pinning method of strengthening the engine.
These oversized bolts are specially made from a high quality steel alloy and heat treated.
The head measures the stock 17mm, so you can use any flywheel combination, The shank is visibly larger in diameter. These bolts are 2mm longer than stock therefore they thread deeper into the front iron.
Goopy Performance Oversized Main Engine Bolts require drilling on front, middle and both rotor housings to accommodate their larger diameter.
Goopy Engine Bolts. Also required is the re-tapping of the front iron to accept the 12mm - 1.25 thread pitch.
Goopy Performance has kits available to help with installation.
Goopy Performance Oversized Main Engine Bolts are sold in sets of five, along with five precision stainless steel washers.
These have been extensively tested on race engines producing in excess of 900 Horse Power, and are completely reusable
http://www.goopyperformance.com/content/engine-bolts
You can use any flywheel with these bolts.
Special pricing to forum member when you buy any of our other parts.
$165.00 per kit (MSRP 195.00)
Goopy Performance ..Products for BIG HP!
We are looking forward to being of service sometime soon.
Goopy Performance
Stony point NY 10980
845-947-0007
Info@goopyperformance.com
Www.GoopyPerformance.com
Goopy Performance Oversize main bolts
Linear Mode
