external wastegate line/hose

gkarmadi · 06-24-2010, 10:21 PM

what's a good external wastegate line/hose to use?? I am sicken tired replacing my silicone hose, it keeps melting. If using ss line, what size should i get/use??

thanks in advance..

GorillaRE · 06-25-2010, 12:14 AM

Quote:

Originally Posted by gkarmadi

what's a good external wastegate line/hose to use?? I am sicken tired replacing my silicone hose, it keeps melting. If using ss line, what size should i get/use??

thanks in advance..

-4 stainless. And ALWAYS protect any and all lines, wires etc. near the turbo/exhaust with this > http://www.summitracing.com/parts/DEI-010472/

-J

RETed · 06-25-2010, 12:15 AM

If you're burning silicone hoses, you think SS lines is going to be any better?
Most "SS hose" is just a rubber hose wrapped with a SS sleeve.
The rubber isn't more heat resistant than silicone (hose) is?
Granted, the SS sleeve does reject some heat, but SS has this bad property of absorbing and keeping heat in.

I'd really look into trying to rerouting your hoses to see if you can do better.
Next, I would look into hose coverings like those fire sleeves for spark plug wires?
http://www.heatshieldproducts.com/red-hot_sleeve.php
Look, even they use silicone as a material on their fire sleeves.
http://www.pitstopusa.com/SearchResu...ategoryID=2429
Check out their inventory...

-Ted

classicauto · 06-25-2010, 07:58 AM

+1

I had SS lines on my old turbo setup. Greddy typeR gate......I was trying to diagonsea boost problem that was acting like a boost leak. Ended up being a pin hole burnt in the SS line.

Fire sleeving or other protective wrap is the best insurance. Or hard line.

gkarmadi · 06-26-2010, 08:04 PM

So, what's a good (or highly recomended) hose to use for wastegate?

Btw, thanks for all the input..

***TitaniumTT*** · 06-27-2010, 12:10 AM

-3 SS hardline. Think brake line

Max777 · 06-27-2010, 01:44 PM

like, with brake line fittings as well? Sick!

***TitaniumTT*** · 06-27-2010, 08:40 PM

Yeah, pretty much.

vex · 06-27-2010, 08:59 PM

Just stop pussy-footin' around and hard line it already.

I'm on a hard line trip. Hard lining my coolant overflow, my scavenge pump and probably a load of everything else

Yes... I like torture and pain.

***TitaniumTT*** · 06-27-2010, 09:06 PM

Nah, you just like stroking hard lines

The coolant system work that you posted up looks damn sexy.

vex · 06-27-2010, 09:15 PM

It'll look drop dead gorgeous when I put in that order for the re-circ tank

I'm thinking I may adjust the design a little bit which will lend itself to a more compact design... though you may not like the idea

06-24-2010, 10:21 PM	#1
gkarmadi water jacket mod?!! Join Date: Apr 2009 iTrader: (0) Posts: 25 Rep Power: 0	external wastegate line/hose what's a good external wastegate line/hose to use?? I am sicken tired replacing my silicone hose, it keeps melting. If using ss line, what size should i get/use?? thanks in advance.. __________________ 86GXL BSC streetport + TD07@13psi

06-26-2010, 08:04 PM	#5
gkarmadi water jacket mod?!! Join Date: Apr 2009 iTrader: (0) Posts: 25 Rep Power: 0	So, what's a good (or highly recomended) hose to use for wastegate? Btw, thanks for all the input.. __________________ 86GXL BSC streetport + TD07@13psi

06-27-2010, 12:10 AM	#6
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	-3 SS hardline. Think brake line __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-27-2010, 01:44 PM	#7
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	like, with brake line fittings as well? Sick! __________________ Rotaries:They are NOT that complicated!

06-27-2010, 08:40 PM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Yeah, pretty much. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-27-2010, 08:59 PM	#9
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Just stop pussy-footin' around and hard line it already. I'm on a hard line trip. Hard lining my coolant overflow, my scavenge pump and probably a load of everything else Yes... I like torture and pain. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

06-27-2010, 09:06 PM	#10
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Nah, you just like stroking hard lines The coolant system work that you posted up looks damn sexy. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-27-2010, 09:15 PM	#11
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	It'll look drop dead gorgeous when I put in that order for the re-circ tank I'm thinking I may adjust the design a little bit which will lend itself to a more compact design... though you may not like the idea __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group