Project86- My first (and probably not the last) Rebuild - Page 30

***TitaniumTT*** · 01-22-2015, 09:57 PM

Cause I know if I say Levine you'll be like

project86 · 01-22-2015, 10:06 PM

Quote:

Originally Posted by TitaniumTT

Napa dude...

Don't you "Napa dude...." Me

Quote:

Originally Posted by TitaniumTT

Cause I know if I say Levine you'll be like

I guess that a local parts store to you?

project86 · 01-23-2015, 10:15 AM

Wooohoooo! reman 4pistons for $45 each!

http://www.autozone.com/parts/brakes...7_2362_101141/

project86 · 01-24-2015, 12:34 PM

just ordered a new Racing Beat front sway bar and end links! Man it felt good to press the submit order button. I haven't bought parts for the car in so long.

Also, Im strongly considering having the front subframe powder coated. I briefly looked underneath the car yesterday and it doesn't seem like its gonna be too hard to take down, but does any one have any advice anything that could give me issues while taking it off?

chibikougan · 01-24-2015, 01:25 PM

Nice! Oh and before I forget here:

http://foxed.ca/index.php?page=rx7manual

project86 · 01-27-2015, 06:46 PM

Quote:

Originally Posted by chibikougan

Nice! Oh and before I forget here:

http://foxed.ca/index.php?page=rx7manual

i have a haynes manual.. i always forget to look in it.

project86 · 04-08-2015, 07:54 PM

So... since I'm gonna be moving again soon i had to undo the work i did for my hub swap. Luckily i never got the passenger side done as well or i would have had to tackle the subframe too... any who..... i promise this will get kicked off soon. but here is a pic to tide ya over.

chibikougan · 04-08-2015, 08:25 PM

Hmmm looks familiar

... Kick arse you got some Calipers for $45 where they bare Aluminium or painted?

Things are much easier when they roll...

project86 · 04-08-2015, 08:43 PM

Ya I'm excited to have some people to hang with again. My dad might be moving down here too.

chibikougan · 04-08-2015, 08:50 PM

Quote:

Originally Posted by project86

Ya I'm excited to have some people to hang with again. My dad might be moving down here too.

That would be really cool! I talk to Matt a bit and Sean is a family man so not like he can Hang but he is always down to BS when I do see him never room though cause he always has his daughter with him. Good dad.

Ryan might be in Jail I dunno I quit hangin at Daves and lost touch. Last I heard his car was totaled racing a grand am on 10th ave bridge. Heard some other worse stuff I can't share.

Have not talked to Kyle since a little after you moved. Figured it best to let them be a family.

project86 · 08-26-2015, 08:22 AM

The car is for sale now if anyone wanted to know the status of the build

01-22-2015, 09:57 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Cause I know if I say Levine you'll be like __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

01-23-2015, 10:15 AM	#3
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Wooohoooo! reman 4pistons for $45 each! http://www.autozone.com/parts/brakes...7_2362_101141/ __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

01-24-2015, 12:34 PM	#4
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	just ordered a new Racing Beat front sway bar and end links! Man it felt good to press the submit order button. I haven't bought parts for the car in so long. Also, Im strongly considering having the front subframe powder coated. I briefly looked underneath the car yesterday and it doesn't seem like its gonna be too hard to take down, but does any one have any advice anything that could give me issues while taking it off? __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure" Last edited by project86; 01-25-2015 at 09:05 PM.

04-08-2015, 08:43 PM	#9
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	Ya I'm excited to have some people to hang with again. My dad might be moving down here too. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

08-26-2015, 08:22 AM	#11
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	The car is for sale now if anyone wanted to know the status of the build __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"