The Unofficially Official: To-Do List Thread DGRR 2013 Edition

daleclark · 01-18-2013, 09:33 AM

Quote:

Originally Posted by banzaitoyota

Don't bring Christi!

Hahaha, this made my morning!

She dropped off the earth, haven't heard anything from or about her in YEARS. Fine by me!

Dale

reddozen · 01-20-2013, 06:28 PM

SSV valve replaced.... STILL TICKS....

I'm starting to think it's just a byproduct of the bridge port. Since there's overlap now, maybe there's a surge being pushed up the secondaries, causing the valve to oscillate a little, and making it tap against mounting bracket... My best guess...

banzaitoyota · 01-23-2013, 06:36 PM

Quote:

Originally Posted by banzaitoyota

Overkill for tow capacity? BTW traded the 92 Dodge CTD for the trailer,

Silly question, will they have parking for the rig?

djmtsu · 01-23-2013, 06:52 PM

Yes, and no. There should be a place across the street from the lodge to park it, but when the show is on the space will be tight. There are other spots to park though, and many cabins might have room.

slvrstreak · 01-24-2013, 10:01 AM

1. Change wheels/pads
2. Adjust the SC belt
3. Fix a pesky coolant leak (only high rpms)
4. Tack my wheel weld and bumper up with something more presentable than racing tape

5. Swap fluids
6. Try not to crash on track before the event

BrettLinton7 · 01-25-2013, 05:15 PM

Install new oil cooler lines
Add oil
Get all 4 wheels back on the ground
Pray it still runs in April... Pretty intense.

Daedalus704 · 03-18-2013, 01:28 PM

-Alignment
-New brake pads
-Decide to tune as is, or go ahead and install BNR Stage 4 (would need an intercooler solution, Rotary Extreme V-Mount preferably)
-Decide whether or not to purchase AEM Water/Meth kit for water injection
-Find and fix small exhaust leak
-Plan new oil cooler setup (I want a dual set similar to the FD)
-Complete parallel fueling setup
-Get rid of crappy Prosport Evos the car came with and install AEM UEGO gauges
-Make sure that my other engine is still all ready to go incase I blow the current one up before/during DGRR haha

rx7 vinnie · 03-18-2013, 04:43 PM

Tow vehicle for track car:
Change oil (diesel)
Rotate tires
Track car:
Change oil (still has break-in oil)
New R compound tires
Fuel up fuel cell
Spark plugs
Seat harness (expired last year :-(
Go-pro roll bar mount
Re-do alignment
RX-8... Cousin is driving it there:
Change a Nissan guy into rotaries
Change oil.

djmtsu · 03-19-2013, 12:18 PM

Well, since I found some rust that really needs attention on the Cosmo, I'm bringing the RX-8.

-Change oil
-New plugs, wires, coils,
-New tires
-DETAIL (needs it bad)

No biggie.

Sephitrask · 03-23-2013, 09:23 AM

Replace the clutch (happening next saturday)
Fix exhaust (hopefully)

djmtsu · 03-23-2013, 01:36 PM

Got new tires. So that's done.

Redhawkjrt · 03-23-2013, 09:51 PM

1. Install Mazdaspeed exhaust
2. Install clear corners
3. Install super secret, ultra stealth modification
4. Wash, wax, detail

muibubbles · 03-26-2013, 08:52 PM

ohhh what a fun thread.. ill bite...

Interior
Fabricate
-dash
-floor pans
-trans tunnel
-pass side seat rail/install recaro seat
paint/powdercoat roll bar
paint interior
oh i should also probably make myself a set of door panels..

Engine bay
respray
-re powdercoat everything
engine bay cover
oil cooler
swap oil feed line to turbo
new VMIC? (may put on hold until i modify new front bumper)

Exterior
Fabricate
-Front fenders/make mold, cast new fenders (nightmare)
-Rear over fenders
Side skirts/ vents/ canards
Spoiler
new decals for rims
roof rack
cargo box
paint car????..............

along with some other rubbish..
This is going to be a fun 3 weeks.......

GySgtFrank · 03-26-2013, 09:58 PM

Quote:

Originally Posted by Redhawkjrt

1. Install Mazdaspeed exhaust
2. Install clear corners
3. Install super secret, ultra stealth modification
4. Wash, wax, detail

Hey! Super Secret Ultra Stealth Modifications are not fair! : pout :

Quote:

Originally Posted by muibubbles

This is going to be a fun 3 weeks.......

You're an even bigger masochist than I am.

***TitaniumTT*** · 03-26-2013, 10:26 PM

Speaking of.... off the interwebs and back into the garage for you!!!!! I wanna see this FB damnit (and I can't believe I just said that) as I'm quite impressed with the work done so far....

List for the 8 hasn't changed...

Finish Exhaust
Finish stereo
Adjust rearview Camer
Auto-Close sunroof
ReTint the entire car... this entails dropping it off and opening my wallet... I don't have the patience for that
Plugs, wires, clean air filter
Replace OMP
Change oil
And detailing it

List for the Jeep
Install Battery
Change Oil

I <3 my Mopars

01-20-2013, 06:28 PM	#32
reddozen Gold Wheels FTW Join Date: Mar 2008 iTrader: (0) Posts: 744 Rep Power: 17	SSV valve replaced.... STILL TICKS.... I'm starting to think it's just a byproduct of the bridge port. Since there's overlap now, maybe there's a surge being pushed up the secondaries, causing the valve to oscillate a little, and making it tap against mounting bracket... My best guess... __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

01-23-2013, 06:52 PM	#34
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Yes, and no. There should be a place across the street from the lodge to park it, but when the show is on the space will be tight. There are other spots to park though, and many cabins might have room. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-24-2013, 10:01 AM	#35
slvrstreak Rotary Fan in Training Join Date: May 2011 iTrader: (0) Posts: 30 Rep Power: 0	1. Change wheels/pads 2. Adjust the SC belt 3. Fix a pesky coolant leak (only high rpms) 4. Tack my wheel weld and bumper up with something more presentable than racing tape 5. Swap fluids 6. Try not to crash on track before the event __________________ 2006 Two-toned RX-8 2005 SC'd street-ported RX-8

01-25-2013, 05:15 PM	#36
BrettLinton7 Mountain Man Join Date: Oct 2011 Location: Dahlonega, GA iTrader: (0) Posts: 19 Rep Power: 0	Install new oil cooler lines Add oil Get all 4 wheels back on the ground Pray it still runs in April... Pretty intense. __________________ -'93 BB Touring- Garage ornament -Had: 87 SE, 86 GXL, 91 'Vert, 85 GS, 87 GXL, 88 'Vert, 86 Sport, 89 GTU, 85 GSL-SE

03-18-2013, 01:28 PM	#37
Daedalus704 Rotary Fan in Training Join Date: Feb 2012 Location: NC iTrader: (0) Posts: 34 Rep Power: 0	-Alignment -New brake pads -Decide to tune as is, or go ahead and install BNR Stage 4 (would need an intercooler solution, Rotary Extreme V-Mount preferably) -Decide whether or not to purchase AEM Water/Meth kit for water injection -Find and fix small exhaust leak -Plan new oil cooler setup (I want a dual set similar to the FD) -Complete parallel fueling setup -Get rid of crappy Prosport Evos the car came with and install AEM UEGO gauges -Make sure that my other engine is still all ready to go incase I blow the current one up before/during DGRR haha Last edited by Daedalus704; 03-18-2013 at 01:38 PM..

03-18-2013, 04:43 PM	#38
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	Tow vehicle for track car: Change oil (diesel) Rotate tires Track car: Change oil (still has break-in oil) New R compound tires Fuel up fuel cell Spark plugs Seat harness (expired last year :-( Go-pro roll bar mount Re-do alignment RX-8... Cousin is driving it there: Change a Nissan guy into rotaries Change oil. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

03-19-2013, 12:18 PM	#39
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Well, since I found some rust that really needs attention on the Cosmo, I'm bringing the RX-8. -Change oil -New plugs, wires, coils, -New tires -DETAIL (needs it bad) No biggie. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-23-2013, 09:23 AM	#40
Sephitrask BOILED PEANUTS!!! Join Date: Jun 2010 Location: Jacksonville, Fl iTrader: (0) Posts: 257 Rep Power: 15	Replace the clutch (happening next saturday) Fix exhaust (hopefully) __________________ www.rotarycarclub.com *"The way a Rotary engine makes power is ferocious, much like having a chainsaw under your right foot."*

03-23-2013, 01:36 PM	#41
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Got new tires. So that's done. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-23-2013, 09:51 PM	#42
Redhawkjrt Brake, Turn, Go! Repeat. Join Date: Feb 2009 Location: Springfield, Il. iTrader: (0) Posts: 114 Rep Power: 16	1. Install Mazdaspeed exhaust 2. Install clear corners 3. Install super secret, ultra stealth modification 4. Wash, wax, detail __________________ Redhawk

03-26-2013, 08:52 PM	#43
muibubbles Bubble Tech Join Date: Oct 2008 iTrader: (0) Posts: 161 Rep Power: 17	ohhh what a fun thread.. ill bite... Interior Fabricate -dash -floor pans -trans tunnel -pass side seat rail/install recaro seat paint/powdercoat roll bar paint interior oh i should also probably make myself a set of door panels.. Engine bay respray -re powdercoat everything engine bay cover oil cooler swap oil feed line to turbo new VMIC? (may put on hold until i modify new front bumper) Exterior Fabricate -Front fenders/make mold, cast new fenders (nightmare) -Rear over fenders Side skirts/ vents/ canards Spoiler new decals for rims roof rack cargo box paint car????.............. along with some other rubbish.. This is going to be a fun 3 weeks....... __________________ Bubble Tech www.BubbleTech.us

03-26-2013, 10:26 PM	#45
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Speaking of.... off the interwebs and back into the garage for you!!!!! I wanna see this FB damnit (and I can't believe I just said that) as I'm quite impressed with the work done so far.... List for the 8 hasn't changed... Finish Exhaust Finish stereo Adjust rearview Camer Auto-Close sunroof ReTint the entire car... this entails dropping it off and opening my wallet... I don't have the patience for that Plugs, wires, clean air filter Replace OMP Change oil And detailing it List for the Jeep Install Battery Change Oil I <3 my Mopars __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**