Great way to clean your UIM

Brent · 03-24-2008, 12:47 AM

When I polish parts, I have rigged up a little attachment for steel wool that I normally use with the first buffing compound(i use 4) before the final polish. I have done it both ways and I can tell a small difference.

DMoneyRx-7 · 03-24-2008, 01:05 AM

coo.

DMoneyRx-7 · 03-29-2008, 12:18 PM

Well I went back and checked out how my UIM, LIM, etc were holding up. It looks like everything is still clean. Only thing is that my single turbo is generating alot of heat so the LIM and a few other parts are getting dulled and not that shiny. But they are still clean. Once I get my car for good I am going to re-do those parts.

03-24-2008, 12:47 AM	#1
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	When I polish parts, I have rigged up a little attachment for steel wool that I normally use with the first buffing compound(i use 4) before the final polish. I have done it both ways and I can tell a small difference. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

03-24-2008, 01:05 AM	#2
DMoneyRx-7 The Newbie Join Date: Mar 2008 Posts: 9 Rep Power: 0	coo.

03-29-2008, 12:18 PM	#3
DMoneyRx-7 The Newbie Join Date: Mar 2008 Posts: 9 Rep Power: 0	Well I went back and checked out how my UIM, LIM, etc were holding up. It looks like everything is still clean. Only thing is that my single turbo is generating alot of heat so the LIM and a few other parts are getting dulled and not that shiny. But they are still clean. Once I get my car for good I am going to re-do those parts.