TII trans

Black91n/a · 10-06-2009, 11:52 PM

Quote:

Originally Posted by NoDOHC

The turbo transmission will require a custom driveshaft to connect to the NA diff (different splines). Plus it will require a lot of electrical work (the wires for the reverse lights, 5th gear switch and neutral switch will not reach). The NA trans will take NA power just fine (if it starts out in good shape).

You can get such a driveshaft from Mazdatrix and all I had to do for wiring was to extend 4 wires and change a connector, not really what I'd call "a lot of electrical work".

Quote:

Originally Posted by Flooder

The auto drive shaft will work.

Yes it has the right connections for the TII trans and NA diff, but it's really too short to be a decent solution. You can probably find a driveshaft shop in your area that can extend it for you though to make it a proper solution.

SecondGenPat · 10-07-2009, 11:11 PM

Quote:

Originally Posted by Black91n/a

Yes it has the right connections for the TII trans and NA diff, but it's really too short to be a decent solution. You can probably find a driveshaft shop in your area that can extend it for you though to make it a proper solution.

How much longer? 10-20mm or longer?
thanks

Black91n/a · 10-09-2009, 01:10 AM

It was more like 1 foot, but then I had some slack left at the end.

10-09-2009, 01:10 AM	#3
Black91n/a Rotary Fan in Training Join Date: Mar 2009 Posts: 39 Rep Power: 0	It was more like 1 foot, but then I had some slack left at the end.