fc hatch visor

Full-Cruise · 09-28-2009, 07:21 PM

heres a pic of something i just picked up. the guy says hes been holding it for the past 12 or so years but im glad to have found it before he trashed it... sorry for the quick pics i just took them with the phone when i got to my shop, i was wounder if i could get a few copies made out of carbon or glass sence this mite be one of the last of its kind.

tell me what you guys think

Turbo II · 09-28-2009, 07:34 PM

I think I've only seen one once before and that was in a pic also. I wonder if it's the same thing material wise as what the window visors are/were. If it is and can be duplicated it could be interesting. But nice find man.

Full-Cruise · 09-28-2009, 10:52 PM

im just a bit worried of the reson burning this up.. im going to go junk yard searching and see if i can find a wind visor of this same meterial and test it with some stuff i have around the shop to see if it would melt if that test out good i will trying and get a few coppies made out of it..

Phoenix7 · 09-29-2009, 12:14 AM

nice find, I wanna see more pics in daylight!

Full-Cruise · 09-30-2009, 07:06 PM

sounds good i will take some pics of it on the car when i get the engine back in there to get the car out side

Whizbang · 09-30-2009, 07:25 PM

thats cool.

Howru · 10-01-2009, 01:11 AM

Very nice find!

Whizbang · 10-01-2009, 08:16 PM

perhaps you should talk to shine auto project?

Full-Cruise · 10-02-2009, 11:58 AM

i have a place localy that does good work and i wont have to worry about shipping and what not..

reddozen · 10-05-2009, 12:39 PM

Foresight makes one too.

http://www.rhdjapan.com/jdm/Foresigh...C3S-RX-7-52081

Full-Cruise · 10-05-2009, 12:43 PM

thats nothing like what i have, theres is just a little part of what i have..

Phoenix7 · 10-05-2009, 12:48 PM

Quote:

Originally Posted by reddozen

Foresight makes one too.

http://www.rhdjapan.com/jdm/Foresigh...C3S-RX-7-52081

that thing is dinky compared to the one the OP posted....not close to similar

reddozen · 10-05-2009, 01:54 PM

I know it's not the same, just the same concept.

Phoenix7 · 10-05-2009, 02:19 PM

dunno....maybe....the OPs looks sleeker than the foresight one. Like the air would smoothly go downward towards the rear wing...when I see the foresight I see air pocket at rear hatch.

That's just me thouhg, I may be cookoo. What brand is it??

RotorDad · 10-19-2009, 05:53 PM

+1 on the Nice find, I would like to see how something like that could look on my car.

09-28-2009, 07:34 PM	#2
Turbo II Zoom Freaking Zoom Join Date: Mar 2008 Location: NC Posts: 324 Rep Power: 18	I think I've only seen one once before and that was in a pic also. I wonder if it's the same thing material wise as what the window visors are/were. If it is and can be duplicated it could be interesting. But nice find man. __________________ 1988 RX-7 Convertible 1991 RX-7 Turbo 2004 RX-8 GT 1985 RX-7 GSL - Sold

09-30-2009, 07:25 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	thats cool. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-01-2009, 01:11 AM	#7
Howru Louvers! Join Date: Mar 2008 Location: Vallejo, CA Posts: 66 Rep Power: 18	Very nice find! __________________ 88 GXL N/A -- Maybe I should've kept the exhaust diffusers...

10-01-2009, 08:16 PM	#8
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	perhaps you should talk to shine auto project? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

10-05-2009, 12:39 PM	#10
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	Foresight makes one too. http://www.rhdjapan.com/jdm/Foresigh...C3S-RX-7-52081 __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

09-28-2009, 10:52 PM	#3
Full-Cruise The Newbie Join Date: Sep 2009 Posts: 17 Rep Power: 0	im just a bit worried of the reson burning this up.. im going to go junk yard searching and see if i can find a wind visor of this same meterial and test it with some stuff i have around the shop to see if it would melt if that test out good i will trying and get a few coppies made out of it..

09-30-2009, 07:06 PM	#5
Full-Cruise The Newbie Join Date: Sep 2009 Posts: 17 Rep Power: 0	sounds good i will take some pics of it on the car when i get the engine back in there to get the car out side

10-02-2009, 11:58 AM	#9
Full-Cruise The Newbie Join Date: Sep 2009 Posts: 17 Rep Power: 0	i have a place localy that does good work and i wont have to worry about shipping and what not..

10-05-2009, 12:43 PM	#11
Full-Cruise The Newbie Join Date: Sep 2009 Posts: 17 Rep Power: 0	thats nothing like what i have, theres is just a little part of what i have..

10-05-2009, 01:54 PM	#13
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	I know it's not the same, just the same concept. __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

10-19-2009, 05:53 PM	#15
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	+1 on the Nice find, I would like to see how something like that could look on my car. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.