Can i use a low/high-imp injector combination?

[Phoenix7]

1990 Turbo injectors are high impedance because the electrical system is high impedance.

Someone will correct me but as I understand, running low impedance injectors in a high impedance system will overheat and kill them.

http://www.rotaryresurrection.com/2n...ctor_info.html

Originally Posted by RotaryResurrection

If using LI injectors on a HI harness, you must splice into the harness at each injector lead (for a total of 4) 10 ohm/10watt resistors available at Radio Shack for a couple of bucks. It doesn't matter which wire of the 2 per injector you splice to, polarity isn't an issue here. This bumps the LI resistance up to acceptable load for the ECU to see.

[RETed]

Yes, all Kouki FC's run high impedence fuel injectors.

Throwing the low impedence fuel injectors into an originally high impedence set-up will fry the stock ECU.

Installing resistors is the standard thing to do.

What bothers me more is...
Are you trying to do this with the stock ECU???


-Ted