|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
The Newbie
Join Date: Apr 2009
Posts: 6
Rep Power: 0 ![]() |
Turbo Lag
Any ideas on what to look for, I'm gettiing 12lbs of boost when it spools up around 250 rpms, as far as i can tell the second turbo may have issues, also
i beleive my idel is low around 600rpms. Thanks, Mark |
![]() |
![]() |
![]() |
#2 |
Rotary Fanatic
Join Date: Mar 2008
Location: Brenham, TX
Posts: 335
Rep Power: 18 ![]() |
You mean 12 lbs by 2500? That sounds pretty fast to me. Have you tried manually shifting it? Start in 1, and I think the automatic has some kind of button to make sure it stays in the gear you put it. If the turbo transition points are the same as a manual then you should see 10 psi pretty fast then a dip to 8psi around 4300 and then 10 psi again from 4500 all the way to redline.
__________________
500+ HP thanks to: ![]() Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap! |
![]() |
![]() |
![]() |
#3 |
The Newbie
Join Date: Apr 2009
Posts: 6
Rep Power: 0 ![]() |
Transmission/ Turbo lag
I've just driven it, what I'm trying to say is it just begins to spool up at 2500
with full boost @ 3500 to 4000. From 0 to 2500 its slow. The second turbo dosen't seem to be right it dose not come back to 10 I'm not getting that second kick, Someone told me that some line comes loose from this turbo offten, has anyone heard this, and is getting under the car the way to check for this ? |
![]() |
![]() |
![]() |
Bookmarks |
|
|