Strange stock intake. Help ID

[Twilightoptics]

Alright Alright! :O)

Here's where I'm at so far. I have better pictures on my digital camera, but forgot it at work. These are just with my phone.

Added meat and surfaced. Plugged many holes. Ported the secondaries. There were large bumps from the port holes. I went through on one a little bit into the ACV port on the secondaries. I don't know that I can get the tig in there to fill it up. I'll either have to drill through and then fill from the outside or use some epoxy.

I bet I've got about 6-8 hours in it. I left the PCV and the other manifold vacuum port incase I sell it someday and someone needs those. I took off the exhaust manifold head shield mounts. So I wont be installing this until I put a header on. Soon as funds come in, I'll be getting the RB Road Race Header dissassembled. I'll weld it and run it with a stainless 2.5" back to a Borla. Should be loud! LOL Just a stock muffler now with no cats.

Intake and Exhaust should net some good gains!