thinking v8 swap, have a few ?s

NoDOHC · 09-12-2009, 04:35 PM

I have 750.00 in a TII engine and that includes purchasing it and rebuilding it. (I had $375 in purchasing it and about $375.00 in rebuilding it).

You can reuse all the seals except those that have failed, get an NA housing from eBay for $50.00 and take the diffuser out with a pneumatic chisel, buy a gasket set for $140.00 and you are good to go (apex seals cost me $60.00 each at the Mazda Dealer).

At the same time, I have a friend with a 302 Chevy (old school) in an RX7 and that might as well be a 5.0L rotary (revs like a rotary, has similar power band, makes 350 lb-ft of torque and > 400 Hp). (He has more than $750 in his engine).

09-12-2009, 04:35 PM	#1
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I have 750.00 in a TII engine and that includes purchasing it and rebuilding it. (I had $375 in purchasing it and about $375.00 in rebuilding it). You can reuse all the seals except those that have failed, get an NA housing from eBay for $50.00 and take the diffuser out with a pneumatic chisel, buy a gasket set for $140.00 and you are good to go (apex seals cost me $60.00 each at the Mazda Dealer). At the same time, I have a friend with a 302 Chevy (old school) in an RX7 and that might as well be a 5.0L rotary (revs like a rotary, has similar power band, makes 350 lb-ft of torque and > 400 Hp). (He has more than $750 in his engine). __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)