Shop Cleanup Sale!

IR Performance · 05-07-2008, 01:48 PM

In the process of cleaning over the past few weeks, we found a lot of parts laying around that we don't need. Prices are as follows or best offer. I will be updating and adding to the list.

2 intake kits with K&N filters and Polished hard pipes - $150

a bunch of stock motor mount pucks - $35 each

4-5 aluminum motor mount arms - best offer each

stock oil metering lines (used, good shape) -$30, I will include new crush washers

SARD magnetic drain plugs - $30 each

2 complete sets of low mileage iron housings - $450 for 3 or I can split up

2 passenger side front upper control arms - $45 each

stock front brake calipers - $150 (painted your color choice)

rotary aviation coolant o-rings (best offer)

various block off plates $10 each or I can make a set

Oil pan reinforcement braces -

IR Performance · 05-07-2008, 01:49 PM

turbo timer harness - $10

IR Performance · 05-09-2008, 09:38 PM

Crank angle sensors - $20 each or $35 for the pair

New OEM rotor housing to turbo manifold gaskets -$70 each or $130 for the pair.

New OEM downpipe gasket - $65

New OEM pressure plate - $125

New OEM throwout bearing - $70

IR Performance · 05-09-2008, 11:56 PM

Stock intercooler - $35

Air control valve - $20

EGR valve - $20

Double throttle solenoid (the one bolted to the underside of the uim)- $15

Stock ignition coils - $65 for all three

IR Performance · 05-10-2008, 12:18 AM

Mazda 2 piece 2mm apex seals with springs (straight out of a 0 mile reman) - $300

IR Performance · 06-02-2008, 10:38 AM

I also have 2 passenger side doors. These are just the metal skins with no interior panels or trim. I am asking $180 each. Figure $100 for shipping. Normally I wouldn't sell them for less than $250 a piece. We are in the process of moving and I don't want to haul them to the new shop.

IR Performance · 06-02-2008, 10:21 PM

Also have 2 sets of car ramps. There are the ramps you can drive up to perform oil changes or other minor service. $10 a set picked up. I am not shipping them. Basically I am giving them away. This just covers my gas to go grab them.

jstatech · 04-30-2009, 11:04 PM

interested in p plate

speedjunkie · 05-01-2009, 01:49 AM

Are all these parts for FD Ihor? I might be interested in a few of these things, but I gotta get back to my car and look first. Oh shit, I just noticed how old this thread is haha. Do you still have this stuff and for these prices?

IR Performance · 08-19-2009, 11:00 AM

yes mostly fd parts but I have some generic stuff

05-07-2008, 01:48 PM	#1
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	Shop Cleanup Sale! In the process of cleaning over the past few weeks, we found a lot of parts laying around that we don't need. Prices are as follows or best offer. I will be updating and adding to the list. 2 intake kits with K&N filters and Polished hard pipes - $150 a bunch of stock motor mount pucks - $35 each 4-5 aluminum motor mount arms - best offer each stock oil metering lines (used, good shape) -$30, I will include new crush washers SARD magnetic drain plugs - $30 each 2 complete sets of low mileage iron housings - $450 for 3 or I can split up 2 passenger side front upper control arms - $45 each stock front brake calipers - $150 (painted your color choice) rotary aviation coolant o-rings (best offer) various block off plates $10 each or I can make a set Oil pan reinforcement braces - Last edited by IR Performance; 05-09-2008 at 09:55 PM..

05-09-2008, 09:38 PM	#3
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	Crank angle sensors - $20 each or $35 for the pair New OEM rotor housing to turbo manifold gaskets -$70 each or $130 for the pair. New OEM downpipe gasket - $65 New OEM pressure plate - $125 New OEM throwout bearing - $70 Last edited by IR Performance; 05-09-2008 at 09:59 PM..

08-19-2009, 11:00 AM	#10
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	yes mostly fd parts but I have some generic stuff __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

05-07-2008, 01:49 PM	#2
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	turbo timer harness - $10

05-09-2008, 11:56 PM	#4
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	Stock intercooler - $35 Air control valve - $20 EGR valve - $20 Double throttle solenoid (the one bolted to the underside of the uim)- $15 Stock ignition coils - $65 for all three

05-10-2008, 12:18 AM	#5
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	Mazda 2 piece 2mm apex seals with springs (straight out of a 0 mile reman) - $300

06-02-2008, 10:38 AM	#6
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	I also have 2 passenger side doors. These are just the metal skins with no interior panels or trim. I am asking $180 each. Figure $100 for shipping. Normally I wouldn't sell them for less than $250 a piece. We are in the process of moving and I don't want to haul them to the new shop.

06-02-2008, 10:21 PM	#7
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ iTrader: (2) Posts: 249 Rep Power: 17	Also have 2 sets of car ramps. There are the ramps you can drive up to perform oil changes or other minor service. $10 a set picked up. I am not shipping them. Basically I am giving them away. This just covers my gas to go grab them.

04-30-2009, 11:04 PM	#8
jstatech The Newbie Join Date: Apr 2009 iTrader: (0) Posts: 7 Rep Power: 0	interested in p plate

05-01-2009, 01:49 AM	#9
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Are all these parts for FD Ihor? I might be interested in a few of these things, but I gotta get back to my car and look first. Oh shit, I just noticed how old this thread is haha. Do you still have this stuff and for these prices?