holley probs on 13b

[RX-7 Chris]

Originally Posted by Rogue_Wulff

Another old holley trick, is using a short length of fuel line attached to both bowl vents, and a cutout in the middle, pointed upwards. When fuel sloshes in the float bowls, it tends to splash out of the vent, and into the throat of the carb. This helps prevent fuel from getting into the throat of the carb.

This is a great trick. We used to do this all the time for 4-wheeling because we'd have the same problem when at steep angles.

This does happen to all carbs but some easier than others.